Categories


100:1 Metal Gearmotor 37Dx73L mm 24V with 64 CPR Encoder (Helical Pinion)

Product Code: Pololu #4695

100:1 Metal Gearmotor 37Dx73L mm 24V with 64 CPR Encoder (Helical Pinion)
100:1 Metal Gearmotor 37Dx73L mm 24V with 64 CPR Encoder (Helical Pinion)
100:1 Metal Gearmotor 37Dx73L mm 24V with 64 CPR Encoder (Helical Pinion)
100:1 Metal Gearmotor 37Dx73L mm 24V with 64 CPR Encoder (Helical Pinion)

₹3,959.00
GST inclusive



Qty:

Availability: Backorder


Add to Wish List



This gearmotor is a powerful 24V brushed DC motor with a 102.08:1 metal gearbox and an integrated quadrature encoder that provides a resolution of 64 counts per revolution of the motor shaft, which corresponds to 6533 counts per revolution of the gearbox’s output shaft. The gearbox is composed mainly of spur gears, but it features helical gears for the first stage for reduced noise and improved efficiency. These units have a 16 mm-long, 6 mm-diameter D-shaped output shaft. This gearmotor is also available without an encoder.

Key specifications:

voltage no-load performance stall extrapolation
24 V 100 RPM, 100 mA 39 kg⋅cm (540 oz⋅in), 3 A

Dimensions

Size: 37D × 72.5L mm1
Weight: 210 g
Shaft diameter: 6 mm2

General specifications

Gear ratio: 102.08:1
No-load speed @ 24V: 100 rpm
No-load current @ 24V: 0.1 A
Stall current @ 24V: 3 A3
Stall torque @ 24V: 39 kg·cm3
Max output power @ 24V: 8 W4
No-load speed @ 12V: 49 rpm5
No-load current @ 12V: 0.08 A5
Stall current @ 12V: 1.7 A5
Stall torque @ 12V: 24 kg·cm5
Motor type: 24V

Performance at maximum efficiency

Max efficiency @ 24V: 44 %
Speed at max efficiency: 86 rpm
Torque at max efficiency: 5.1 kg·cm
Current at max efficiency: 0.42 A
Output power at max efficiency: 4.5 W

General specifications

Lead length: 20 cm6
Encoders?: Y
Encoder resolution: 64 CPR

Notes:

  • Length measurement is from gearbox face plate to back of encoder cap (it does not include the output shaft). See dimension diagram for details.
  • D shaft.
  • Stalling is likely to damage the gearmotor. Stall parameters come from a theoretical extrapolation of performance at loads far from stall. As the motor heats up, as happens as it approaches an actual stall, the stall torque and current decrease.
  • This is the output power at the maximum recommended operating load of 10 kg⋅cm; higher power might be achievable for brief durations at higher loads (see performance graphs in the datasheet).
  • This motor will run at 12 V but is intended for operation at 24 V.
  • May vary by a few centimeters.

Related Documents

Write a review
Your Name:


Your Review:
Note: HTML is not translated!
Rating:
Bad           Good

Enter the code in the box below:



© 2024, MG Automation Technologies. Powered by MG Super LABS.Find us on Google+
Designed with by