Categories


250x122, 2.13inch E-Ink display HAT for Raspberry Pi

Product Code: Waveshare 12915

250x122, 2.13inch E-Ink display HAT for Raspberry Pi
250x122, 2.13inch E-Ink display HAT for Raspberry Pi
250x122, 2.13inch E-Ink display HAT for Raspberry Pi
250x122, 2.13inch E-Ink display HAT for Raspberry Pi

₹1,779.00
GST inclusive



Qty:

Availability: 1 In Stock


Add to Wish List



This is an E-Ink display HAT for Raspberry Pi, 2.13inch, 250x122 resolution, with embedded controller, communicating via SPI interface, supports partial refresh.

Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.

Features

  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+
  • Preserved solder pads for SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc.
  • Onboard voltage translator, compatible with 3.3V/5V MCUs
  • Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)

Specifications

  • Operating voltage: 3.3V/5V
  • Interface: SPI
  • Outline dimension: 65mm × 30.2mm
  • Display size: 23.71mm × 48.55mm
  • Dot pitch: 0.194 × 0.194
  • Resolution: 250 × 122
  • Display color: black, white
  • Grey level: 2
  • Partial refresh time: 0.3s
  • Full refresh time: 2s
  • Refresh power: 26.4mW(typ.)
  • Standby power: <0.017mW
  • Viewing angle: >170°

Interface

Symbol Description
VCC 3.3V/5V
GND Ground
NC NC
DIN SPI MOSI pin
CLK SPI SCK pin
CS SPI chip selection, low active
DC Data/Command selection (high for data, low for command)
RST External reset, low active
BUSY Busy status output, high active

Demo

2.13inch e-Paper HAT demo

Dimensions

2.13inch e-Paper HAT dimensions

PACKAGE CONTENT

  1. 2.13inch e-Paper HAT x1
  2. RPi screws pack (2pcs) x1
  3. PH2.0 20cm 8Pin x1

Development Resources

Wiki : www.waveshare.com/wiki/2.13inch_e-Paper_HAT

Write a review
Your Name:


Your Review:
Note: HTML is not translated!
Rating:
Bad           Good

Enter the code in the box below:



© 2024, MG Automation Technologies. Powered by MG Super LABS.Find us on Google+
Designed with by