Categories


296x128, 2.9inch E-Ink display module, yellow/black/white three-color

Product Code: Waveshare 14227

296x128, 2.9inch E-Ink display module, yellow/black/white three-color
296x128, 2.9inch E-Ink display module, yellow/black/white three-color
296x128, 2.9inch E-Ink display module, yellow/black/white three-color
296x128, 2.9inch E-Ink display module, yellow/black/white three-color

₹2,079.00
GST inclusive



Qty:

Availability: Backorder


Add to Wish List



296x128, 2.9inch E-Ink display module, yellow/black/white three-color, SPI interface.

This is an E-Ink display module, 2.9inch, 296x128 resolution, with embedded controller, communicating via SPI interface, supports yellow, black, and white three-color display.

Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.

Features

  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.
  • Onboard voltage translator, compatible with 3.3V/5V MCUs
  • Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)

Specifications

  • Operating voltage: 3.3V/5V
  • Interface: 3-wire SPI, 4-wire SPI
  • Outline dimension: 89.5mm × 38mm
  • Display size: 66.89mm × 29.05mm
  • Dot pitch: 0.138 × 0.138
  • Resolution: 296 × 128
  • Display color: yellow, black, white
  • Grey level: 2
  • Full refresh time: 15s
  • Refresh power: 26.4mW(typ.)
  • Standby power: <0.017mW
  • Viewing angle: >170°

Interface

Symbol Description
VCC 3.3V/5V
GND Ground
DIN SPI MOSI pin
CLK SPI SCK pin
CS SPI chip selection, low active
DC Data/Command selection (high for data, low for command)
RST External reset, low active
BUSY Busy status output, low active

PACKAGE CONTENT

  1. 2.9inch e-Paper Module (C) x1
  2. PH2.0 20cm 8Pin x1

Dimensions

2.9inch e-Paper Module dimensions

Development Resources

Wiki : www.waveshare.com/wiki/2.9inch_e-Paper_Module_(C)

Write a review
Your Name:


Your Review:
Note: HTML is not translated!
Rating:
Bad           Good

Enter the code in the box below:



© 2024, MG Automation Technologies. Powered by MG Super LABS.Find us on Google+
Designed with by