Categories


5:1 Micro Metal Gearmotor HPCB 12V

Product Code: Pololu #3036

5:1 Micro Metal Gearmotor HPCB 12V
5:1 Micro Metal Gearmotor HPCB 12V
5:1 Micro Metal Gearmotor HPCB 12V
5:1 Micro Metal Gearmotor HPCB 12V
5:1 Micro Metal Gearmotor HPCB 12V
5:1 Micro Metal Gearmotor HPCB 12V
5:1 Micro Metal Gearmotor HPCB 12V

₹2,699.00
GST inclusive



Qty:

Availability: Backorder


Add to Wish List



This gearmotor is a miniature high-power, 12 V brushed DC motor with long-life carbon brushes and a 4.995:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter.

Key specifications:

voltage no-load performance stall extrapolation
12 V 6000 RPM, 60 mA 0.09 kg⋅cm (1.3 oz⋅in), 0.75 A

These tiny brushed DC gearmotors are available in a wide range of gear ratios—from 5:1 up to 1000:1—and with five different motors: high-power 6 V and 12 V motors with long-life carbon brushes (HPCB), and high-power (HP), medium power (MP), and low power (LP) 6 V motors with shorter-life precious metal brushes. The 6 V and 12 V HPCB motors offer the same performance at their respective nominal voltages, just with the 12 V motor drawing half the current of the 6 V motor. The 6 V HPCB and 6 V HP motors are identical except for their brushes, which only affect the lifetime of the motor.

The HPCB versions (shown on the left in the picture below) can be differentiated from versions with precious metal brushes (shown on the right) by their copper-colored terminals. Note that the HPCB terminals are 0.5 mm wider than those on the other micro metal gearmotor versions (2 mm vs. 1.5 mm), and they are about 1 mm closer together (6 mm vs. 7 mm).

 

Details for item #3036

Exact gear ratio: 27×3720×10=4.995:127×3720×10=4.995:1

This gearmotor is a miniature high-power, 12 V brushed DC motor with long-life carbon brushes and a 4.995:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter.

Dimensions

Size: 10 × 12 × 26 mm1
Shaft diameter: 3 mm2

General specifications

Gear ratio: 4.995:1
No-load speed @ 12V: 6000 rpm
No-load current @ 12V: 0.06 A
Stall current @ 12V: 0.75 A
Stall torque @ 12V: 0.09 kg·cm
No-load speed @ 6V: 3000 rpm3
No-load current @ 6V: 0.05 A3
Stall current @ 6V: 0.38 A3
Stall torque @ 6V: 0.05 kg·cm3
Extended motor shaft?: N
Long-life carbon brushes?: Y
Motor type: 0.75A stall @ 12V (HPCB 12V - carbon brush)

Notes:

1.  Output shaft adds 9 mm to the 26 mm length.

2.  D shaft.

3.  This motor will run at 6 V but is intended for operation at 12 V.

Write a review
Your Name:


Your Review:
Note: HTML is not translated!
Rating:
Bad           Good

Enter the code in the box below:



© 2024, MG Automation Technologies. Powered by MG Super LABS.Find us on Google+
Designed with by