Categories


50:1 Metal Gearmotor 37Dx70L mm 12V with 64 CPR Encoder (Helical Pinion)

Product Code: Pololu #4753

50:1 Metal Gearmotor 37Dx70L mm 12V with 64 CPR Encoder (Helical Pinion)
50:1 Metal Gearmotor 37Dx70L mm 12V with 64 CPR Encoder (Helical Pinion)
50:1 Metal Gearmotor 37Dx70L mm 12V with 64 CPR Encoder (Helical Pinion)
50:1 Metal Gearmotor 37Dx70L mm 12V with 64 CPR Encoder (Helical Pinion)

₹3,959.00
GST inclusive



Qty:

Availability: Backorder


Add to Wish List



This gearmotor is a powerful 12V brushed DC motor with a 50:1 metal gearbox and an integrated quadrature encoder that provides a resolution of 64 counts per revolution of the motor shaft, which corresponds to 3200 counts per revolution of the gearbox’s output shaft. The gearbox is composed mainly of spur gears, but it features helical gears for the first stage for reduced noise and improved efficiency. These units have a 16 mm-long, 6 mm-diameter D-shaped output shaft. This gearmotor is also available without an encoder.

Key specifications:

voltage no-load performance stall extrapolation
12 V 200 RPM, 200 mA 21 kg⋅cm (290 oz⋅in), 5.5 A

Specification

Dimensions

Size: 37D × 70L mm1
Weight: 205 g
Shaft diameter: 6 mm2

General specifications

Gear ratio: 50:1
No-load speed @ 12V: 200 rpm
No-load current @ 12V: 0.2 A
Stall current @ 12V: 5.5 A3
Stall torque @ 12V: 21 kg·cm3
Max output power @ 12V: 10 W
No-load speed @ 6V: 100 rpm4
No-load current @ 6V: 0.15 A4
Stall current @ 6V: 3.0 A4
Stall torque @ 6V: 12 kg·cm4
Motor type: 12V

Performance at maximum efficiency

Max efficiency @ 12V: 51 %
Speed at max efficiency: 180 rpm
Torque at max efficiency: 2.2 kg·cm
Current at max efficiency: 0.66 A
Output power at max efficiency: 4.0 W

General specifications

Lead length: 20 cm5
Encoders?: Y
Encoder resolution: 64 CPR

Notes:

1) Length measurement is from gearbox face plate to back of encoder cap (it does not include the output shaft). See dimension diagram for details.
2) D shaft.
3) Stalling is likely to damage the gearmotor. Stall parameters come from a theoretical extrapolation of performance at loads far from stall. As the motor heats up, as happens as it approaches an actual stall, the stall torque and current decrease.
4) This motor will run at 6 V but is intended for operation at 12 V.
5) May vary by a few centimeters.
Write a review
Your Name:


Your Review:
Note: HTML is not translated!
Rating:
Bad           Good

Enter the code in the box below:



© 2024, MG Automation Technologies. Powered by MG Super LABS.Find us on Google+
Designed with by