Categories


Clicker 2 for Kinetis

Product Code: MIKROE-2329

Clicker 2 for Kinetis
Clicker 2 for Kinetis
Clicker 2 for Kinetis

₹4,099.00
GST inclusive



Qty:

Availability: Backorder


Add to Wish List



Focus on your main idea because clicker 2 will take care of the details for you: your prototype already has a power management system in place. The onboard LTC®3586-1 IC will provide 3.3V or 5V to the clicks. It turns the USB port into a battery charger. For convenience, clicker 2 for Kinetis features a reset button and an ON/OFF switch (you can also connect an external ON/OFF switch).

Thousands of possibilities with click boards

With two mikroBUS™ sockets on clicker 2, you can take advantage of the huge potential of click™ boards, the constantly expanding range of over 200 add-on boards. Blend different functionalities together and come up with new and original inventions. That’s just two clicks and your project is half-way done. Go ahead and play with a few ideas right away.

Programming

To make your prototyping experience as convenient as possible, clicker 2 for Kinetis is preprogrammed with a USB HID bootloader. Just download our mikroBootloader application and you’re ready to upload your firmware. On-board mikroProg for Kinetis connector enables programming through external programmer/debugger.

Power Management

clicker 2 for Kinetis features LTC®3586, a highly integrated power management and battery charger IC that includes a current limited switching PowerPath manager. LTC®3586 also enables battery charging over a USB connection.

You can supply power to the board with a micro USB cable provided in the package. On-board voltage regulators provide the appropriate voltage levels to each component on the board.

Specification

Applications This compact board brings flexibility of click add-on boards to your favorite microcontroller, making it a perfect starter kit for implementing your ideas
Architecture ARM (32-bit)
MCU MK64FN1M0VDC12
MCU speed 120MHz
MCU Memory 1 MB of Flash, 256 KB of SRAM
Programming Preprogrammed with USB HID bootloader. Also features mikroProg for Kinetis connector.
Key Features LTC®3586 - power management and battery charger IC
Expandability 2 x mikroBUS sockets, two 1x26 mikromedia-compatible headers
Input Voltage 5V (via USB) or Li-Polymer Battery (3.7V)

Downloads

 clicker 2 for Kinetis bootloader

 clicker 2 for Kinetis Examples

 mikroProg suite for ARM v150

Write a review
Your Name:


Your Review:
Note: HTML is not translated!
Rating:
Bad           Good

Enter the code in the box below:



© 2024, MG Automation Technologies. Powered by MG Super LABS.Find us on Google+
Designed with by