Categories


Half-bridge Steel Strain Gauge (Bag of 2)

Product Code: Phidgets 3144_0

Half-bridge Steel Strain Gauge (Bag of 2)
Half-bridge Steel Strain Gauge (Bag of 2)
Half-bridge Steel Strain Gauge (Bag of 2)
Half-bridge Steel Strain Gauge (Bag of 2)
Brand: Phidgets

₹1,729.00
GST inclusive



Qty:

Availability: Backorder


Add to Wish List



A strain gauge is a small sensor whose resistance changes depending on the strain experienced by the structure it is attached to. They are similar to Load Cells, but are useful for applications where the structure has already been built. For example, you could use a strain gauge and a bridge interface to measure the strain on various segments of the chassis of a robot or vehicle.

This strain gauge is designed to be used with steel structures. It can be used with other materials, but using steel will result in the lowest sensitivity to changes in temperature.

For more information on the different types of strain gauges and how to properly install them, have a look at our Strain Gauge Primer.

Connection:

This is a half-bridge strain gauge. You can either use two to form a full-bridge circuit, or use resistors with a half-bridge. For more information on bridge circuits, see the Strain Gauge Primer. Strain gauges require power and produce a small voltage differential when under load. In order to read this small signal, you'll need an amplifier or a board with a high-precision analog-to-digital converter. See the Connection & Compatibility tab for a list of Phidgets that will connect to this strain gauge.

Bridge Interfaces:

Load cells and strain gauges produce a very tiny voltage differential and must be read by a high-resolution analog-to-digital converter. The bridge interfaces in the table below can be used to interface them. For more information on how to properly attach a strain gauge, see the Strain Gauge Primer.

Product

Board

Image

Part Number

 

Controlled By

Number of Bridge Inputs

1046_0B

 

USB (Mini-USB)

4

DAQ1500_0

 

VINT

2

Included:

FUNCTIONAL
  • Two Half-bridge steel torque strain gauges
  • Strip of six solder pads

Specifications:

 

Sensor Properties

Controlled By

Bridge Input

Sensor Type

Half-bridge Strain Gauge

Strain Gauge Mount Type

Steel

Electrical Properties

Resistance Value

(per quarter-bridge) 1 kΩ

Physical Properties

Backing Material

Phenolic Resin

Active Area Length

3 mm

Customs Information

Canadian HS Export Code

8423.90.00

American HTS Import Code

8423.90.10.00

Country of Origin

CN (China)

Documents

Write a review
Your Name:


Your Review:
Note: HTML is not translated!
Rating:
Bad           Good

Enter the code in the box below:


Tags: Half, bridge, Steel, Strain, Gauge, Bag, of, 2, 3144, 0,

© 2024, MG Automation Technologies. Powered by MG Super LABS.Find us on Google+
Designed with by