Categories


MCC 118: Voltage Measurement DAQ HAT for Raspberry Pi® 12-bit, 100 kS/s, 8 SE Analog Inputs

Product Code: DG 6069-410-000

MCC 118: Voltage Measurement DAQ HAT for Raspberry Pi® 12-bit, 100 kS/s, 8 SE Analog Inputs
MCC 118: Voltage Measurement DAQ HAT for Raspberry Pi® 12-bit, 100 kS/s, 8 SE Analog Inputs
MCC 118: Voltage Measurement DAQ HAT for Raspberry Pi® 12-bit, 100 kS/s, 8 SE Analog Inputs
MCC 118: Voltage Measurement DAQ HAT for Raspberry Pi® 12-bit, 100 kS/s, 8 SE Analog Inputs
MCC 118: Voltage Measurement DAQ HAT for Raspberry Pi® 12-bit, 100 kS/s, 8 SE Analog Inputs
Brand: Digilent

₹8,779.00
GST inclusive



Qty:

Availability: Backorder


Add to Wish List



The Measurement Computing MCC 118 and MCC 128 DAQ HATs feature eight channels of analog voltage measurement for Raspberry Pi-based data acquisition systems. Each device has a maximum sample rate of 100 kS/s for taking single point or waveform voltage measurements. Up to eight MCC HATs can be stacked onto one Raspberry Pi - providing up to 64 channels of data and a maximum throughput of 320 kS/s.

MCC 118 features 12-bit resolution and 8 SE analog inputs with a +/-10V input range.

MCC 128 features 16-bit resolution and 8 SE/ 4 DIFF analog inputs with the following input ranges (+/-10 V, +/-5 V, +/-2 V, +/-1 V).

All DAQ HATs include C/C++® and Python™ examples and an open-source library. Comprehensive API and hardware documentation are also provided.

There are five devices in the MCC DAQ HAT Series. Models are available with voltage inputs, thermocouple inputs, IEPE-based sensor inputs, analog outputs, and digital I/O allowing users to configure multifunction, Raspberry Pi-based data logger solutions.

OEM versions of the MCC 118 and MCC 128 with (unpopulated) header connectors instead of screw terminals are available. Please contact our sales department by submitting a form for purchasing information.

Raspberry Pi is not included with the MCC 118/MCC 128.

Features:

MCC 118:

  • 8 SE 12-bit voltage inputs
  • 100 kS/s max sample rate (320 kS/s aggregate for stacked boards)
  • +/-10 V input range
  • Onboard sample buffers allow high-speed acquisition
  • External scan clock I/O
  • External digital trigger input
  • Screw terminal connections

Included:

  • One MCC DAQ HAT (choose between MCC 118 and MCC 128)
  • 2x20 Header connector (plugs into the 40 pin GPIO connector on the Pi board)
  • Jumpers (3)
  • Standoffs (4)
  • Screws (4)
  • Nuts (4)
  • Printed insert: Getting Started with MCC DAQ HATs
  • MCC packaging assembly/foam, etc.

Support:

MCC 118 Datasheet

MCC Knowledgebase
MCC DAQ HAT Library Resources and Firmware Updates

Write a review
Your Name:


Your Review:
Note: HTML is not translated!
Rating:
Bad           Good

Enter the code in the box below:



© 2024, MG Automation Technologies. Powered by MG Super LABS.Find us on Google+
Designed with by