Categories


Brushless 2 click

Product Code: MIKROE-2754

Brushless 2 click
Brushless 2 click
Brushless 2 click
Brushless 2 click

₹1,789.00
GST inclusive



Qty:

Availability: Backorder


Add to Wish List



Brushless 2 click carries the DRV10964 BLDC motor controller with an integrated output stage from Texas Instruments. The click is designed to run on either 3.3V or 5V power supply. It communicates with the target microcontroller over the following pins on the mikroBUS™ line: AN, RST, CS, PWM, INT.

How the click works

A 3 wire BLDC motor can be connected over the screw terminals; speed is controlled through PWM pin on the mikroBUS™ line. The click also has feedback on the interrupt pin (INT), so you can see exactly how fast the motor is going.

DRV10964 motor driver features

The DRV10964 is a three-phase sensorless motor driver with integrated power MOSFETs. It is specifically designed for high-efficiency, low-noise and low-external component count motor drive applications. The proprietary sensorless windowless 180° sinusoidal control scheme offers ultra-quiet motor drive performance.

The DRV10964 contains an intelligent lock detect function, combined with other internal protection circuits to ensure safe operation.

Specifications

Type DC
Applications The automotive industry, drones (because of the good power-to weight ratio of brushless motors), computers, medical equipment, HVAC systems, small home appliances, robotics, battery powered systems, small cooling fans in computers, toys, etc.
On-board modules DRV10964 5-V, three-phase sinusoidal sensorless BLDC motor driver
Key Features Input voltage range 2.1 to 5.5 V
Interface GPIO,PWM
Input Voltage 3.3V or 5V
Click board size S (28.6 x 25.4 mm)

Pinout diagram

This table shows how the pinout on Brushless 2 click corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns).

Notes Pin Mikrobus logo.png Pin Notes
Resistor setting for configuring the handoff threshold sense CFG 1 AN PWM 16 PWM Speed control input
Motor direction selection FR 2 RST INT 15 NC  
Speed indicator selector FGS 3 CS TX 14 NC  
  NC 4 SCK RX 13 NC  
  NC 5 MISO SCL 12 NC  
  NC 6 MOSI SDA 11 NC  
Power supply +3.3V 7 3.3V 5V 10 +5V Power supply
Ground GND 8 GND GND 9 GND Ground

Jumpers and settings

Designator Name Default Position Default Option Description
JP1 PWR.SEL. Left 3V3 Power supply selection, left position 3V3, right position 5V

Programming

Code examples for Brushless 2 click, written for MikroElektronika hardware and compilers are available on Libstock.

Code snippet

This code example shows how to change the speed and direction of the motor by pressing buttons on the development board.

01 uint8_t const maxPwmDuty = 255;
02 uint8_t currentDuty = 20 ;
03 uint8_t oldstate = 0;
04 
05 void systemInit()
06 {
07     ANCON0 = 0x00;
08     ANCON1 = 0x00;
09     ANCON2 = 0x00;
10     PWM2_Init(5000);
11     PWM2_Start();
12     PWM2_Set_Duty(currentDuty);
13     MOTOR_DIR_PIN_Direction = 0;
14 }
15 
16 void Brushless_2_Init()
17 {
18     MOTOR_DIR_PIN = 1;
19 }
20 
21 void Brushless_2_Task()
22 {
23     if (Button(&PORTB, 1, 1, 1))
24     {
25         currentDuty++;
26         PWM2_Set_Duty(currentDuty);
27         if (currentDuty > maxPwmDuty)      
28            currentDuty = 0;              
29        
30    }
31     
32     if (Button(&PORTB, 5, 1, 1))
33     {                                              
34         oldstate = 1;                              
35    }
36     if (oldstate && Button(&PORTB, 5, 1, 0))
37     {  
38         MOTOR_DIR_PIN = ~MOTOR_DIR_PIN;                              
39        oldstate = 0;  
40     }                               
41 }
42 
43 void main()
44 {
45     systemInit();
46     Brushless_2_Init();
47 
48    while( 1 )
49     {
50             Brushless_2_Task();
51     }
52 }

Downloads

 mikroBUS™ Standard specification 
 DRV10964 datasheet
 LibStock: Brushless 2 click library 

 Brushless 2 click schematic

Write a review
Your Name:


Your Review:
Note: HTML is not translated!
Rating:
Bad           Good

Enter the code in the box below:



© 2024, MG Automation Technologies. Powered by MG Super LABS.Find us on Google+
Designed with by