Categories


Brushless DC Motor Phidget

Product Code: Phidgets DCC1100_0

Brushless DC Motor Phidget
Brushless DC Motor Phidget
Brushless DC Motor Phidget
Brand: Phidgets

₹7,479.00
GST inclusive



Qty:

Availability: 1 In Stock


Add to Wish List



Description

Control a brushless DC motor from your VINT Hub. The hall effect input enables easy position and velocity control.

Brushless DC motors have several advantages over their brushed counterparts: They have longer lifespans, run quieter, and have built-in position control thanks to the hall-effect sensor that tells the controller which coil to activate. Based on this feedback, the controller selects which coil to activate, which causes the rotor to be pulled into place.

The DCC1100 requires a 8-30V DC external power supply and can control a single brushless DC motor from a port on your VINT Hub (see the Connection and Compatibility tab for a list of hubs). In software you can either control the motor velocity, acceleration and stall velocity directly, or you can use the PositionController object to set the motor position using our closed-loop PID controller. For more information on how to use and configure the PositionController, take a look at the technical section of the DCC1100 User Guide.

Safety and Reliability

The DCC1100 has been designed with safety in mind:

  • An on-board temperature chip is accessible via the TemperatureSensor object, so your program will be able to watch out for overheating.
  • The VINT port is electrically isolated from the rest of the board, making it simple to build a Phidgets system without having to worry about ground loops or damage to your hub or computer.
  • A fuse is included on-board for safety in case of power surges.

Hall-Effect Input

3019 Cable Motor Wire
Black Ground
Green Hall-Effect 'C'
White Hall-Effect 'B'
Red +5V
Brown Hall-Effect 'A'

To make connection simple, the DCC1100 has a 5-pin molex connector to interface with the motor's hall-effect output. All BLDC motors sold at Phidgets have the mating connector soldered to the end of the cable. If you have your own motor, you can cut a Phidget Encoder cable in half and solder them together as follows:

Specifications

Board Properties
Controlled By VINT
Electrical Properties
Supply Voltage Min 8 V DC
Supply Voltage Max 30 V DC
Current Consumption (Unconfigured) (VINT Port) 500 μA
Current Consumption Max (VINT Port) 650 μA
Continuous Motor Current Max 20 A
Controller Properties
Motor Type Brushless DC
Number of Motor Ports 1
Velocity Resolution 0.003 Duty Cycle
Hall-Effect Sensor
Hall-Effect Voltage 5 V DC
Physical Properties
Operating Temperature Min -40 °C
Operating Temperature Max 85 °C

Documents

Library & Driver Downloads

Write a review
Your Name:


Your Review:
Note: HTML is not translated!
Rating:
Bad           Good

Enter the code in the box below:



© 2024, MG Automation Technologies. Powered by MG Super LABS.Find us on Google+
Designed with by