Starter Shield EN(Tick Tock shield) v2

Product Code: Seeed 104030047

Starter Shield EN(Tick Tock shield) v2
Starter Shield EN(Tick Tock shield) v2
Starter Shield EN(Tick Tock shield) v2
Starter Shield EN(Tick Tock shield) v2
Brand: Seeedstudio

GST inclusive


Availability: Backorder

Add to Wish List

This Starter Shield is a perfect choice for the beginners of Maker World. By playing with it, you can literally learn some basic skills that are required to be a maker, like soldering techniques, basic electronic circuit principles and programming skills. What? Afraid of soldering and programming? Don’t worry, we’ve prepared a very detailedSoldering Guide and fully supported library of programming examples from easy level to hard level, you can always find something useful in it.

Starter Shield contains most commonly used components like buttons, light sensors, temperature sensors, buzzer and display etc. Once you finish the soldering task, you’ll find out it’s actually a geek style alarm clock which can auto adjust the brightness of display and keep in synch with real world time. Yet, you have to connect it to an Arduino/Seeeduino board and download the code first.


  • Soldering friendly through-holes

  • Alarm clock in geek style

  • All-in-one platform for beginners

  • Arduino/Seeeduino compatible

Part List

  • 1x Buzzer 3V;

  • 1x CAP Aluminum 100uF-16V;

  • 1x Temperature Sensor-10k;

  • 1x LS06-S phototransistor

  • 4x RES 10K-5%-1/4W;

  • 4x RES 220R-5%-1/4W;

  • 3x RES 4.7K-5%-1/4W;

  • 2x Blue Male Header VERT;

  • 2x Blue Male Header VERT;

  • 1x Blue Female Header VERT;

  • 1x Lithium-ion Battery 3V-40mAh;

  • 1x SMD Battery Cell Holder Plastic;

  • 1x IC Driver;

  • 1x RTC Clock/Timing;

  • 2x IC Socket;

  • 3x Button Top;

  • 2x Black Round Female Header VERT;

  • 1x LED Green-Green;

  • 1x LED Blue-Blue;

  • 2x LED Red-Red;

  • 1x LED 7-SEG-Red;

  • 1x Crystal 32.768KHz-12.5pF-20ppm-30K;

  • 2x CAP Ceramic Disc 1nF-50V-20%;

  • 1x CAP Ceramic Disc 100nF-25V;

  • 1x Starter Shield Soldering Guide

  • 1x Starter Shield PCB


Please visit our wiki page for more info about this product. It will be appreciated if you can help us improve the documents, provide more demo code or tutorials. For technical support, please post your questions to our forum.

Write a review
Your Name:

Your Review:
Note: HTML is not translated!
Bad           Good

Enter the code in the box below:

© 2018, MG Automation Technologies. Powered by MG Super LABS.Find us on Google+
Designed with by