Categories


DF15RMG Tilt Kit (20kg)

Product Code: DFR SER0030

DF15RMG Tilt Kit (20kg)
DF15RMG Tilt Kit (20kg)
DF15RMG Tilt Kit (20kg)
DF15RMG Tilt Kit (20kg)
DF15RMG Tilt Kit (20kg)
Brand: DF Robot

₹3,129.00
GST inclusive



Qty:

Availability: 4 In Stock


Add to Wish List



INTRODUCTION

This is a most powerful standard servo motor from DFRobot so far.A servomotor is a rotary actuator that allows precise control of angular position.This is specifically designed for the robotics application which requires high quality in a variety of the servo features.

The DF15RMG standard servo equips two pairs of the servo shells. One is a stardard shell with four M4 mounting holes. And the other one includes a shell with double bearing which is specially designed for the application of the robot arm or the joints.The shells of this kit are thickened to make it stable enough for motion system.

The torque of this servo is about 19kg.cm at 7.4v power supply.Using the Arduino servo library, you could drive this servo motor easily.To reduce the consumption of your microcontroller, this servo has a lock function for the pulse detection. So driving it to a target position just requires one PPM controlling signal. 

SPECIFICATION

Mechanical specification

  • Rotation angle range: 170°
  • No-load speed:60°/0.16s @7.4v
  • Stall torque:19.3kg.cm(7.4v)
  • Dynamic torque:15.1kg.cm(7.4v)
  • Gear:steel,copper mixed gear
  • Assembly method:fastening with double layer 4 screws
  • Equip 2 pairs of shells,2 metal servo horns and 2 servo support
  • PPM Driven
  • Size: 40x40x20 (mm)
  • Weight: 65g

Electrical specification 

  • Working Voltage: 5-7.4v
  • Stall current:3A(@8.5V - Limit test)
  • PPM Voltage:3V-5V
  • PPM Resolution:2us
  • PWM driver frequency:4KHZ
  • Range of PPM positive pulse width:400us-2550us
  • Minimum value of PPM negative pulse width:400us

Cable definition

  • Brown - GND
  • Red  - VCC
  • Orange  - Signal(PPM input wire)

DOCUMENTS

SHIPPING LIST

  • DF15RMG Servo x1
  • A pair of standard shell x1
  • A pair of shell with bearing  x1
  • M2 self-tapping screws x7
  • M3 black round head screws x10
Write a review
Your Name:


Your Review:
Note: HTML is not translated!
Rating:
Bad           Good

Enter the code in the box below:


Tags: DF15RMG, Tilt, Kit, 20kg, DFR, SER, 0030,

© 2024, MG Automation Technologies. Powered by MG Super LABS.Find us on Google+
Designed with by