Surveyor™ Analog pH Sensor / Meter
Product Code: AS SRV-pH
Datasheets
Basic Sample Code
Tools
Instructable
Certificates
3D files
(Previously known as the Gravity Analog pH Sensor / Meter)
If you are building a machine that requires pH measuring capabilities, but you only need the accuracy found in a low-cost handheld pH meter, the Atlas Scientific Surveyor™ pH meter might be for you. Simple to use and straight to the point, the Atlas Scientific Surveyor™ pH meter outputs an analog signal that’s easy to read.
| Reads | pH |
| Range | 0.1 − 14.0 |
| Resolution | 0.1 |
| Accuracy | +/– 0.2 |
| Response Time | Continuous analog output |
| Supported probes | Any type & brand |
| Calibration | Optional |
| Temp Compensation. | No (unnecessary) |
| Data Protocol | Analog 2.7 − 0.2V |
| Dimensions | 54mm x 32mm (2.2″ x 1.2″) |
| Weight | 15 grams |
| The Surveyor™ Analog pH Sensor / Meter comes with (4) standoffs and screws, (1) 3 pin jumper cable |
Write a review
Your Name:
Your Review:
Note: HTML is not translated!
Rating:
Bad
Good
Enter the code in the box below:
© 2025, MG Automation Technologies. Powered by MG Super LABS.Find us on Google+
Designed with by Ish Gupta