NCD Ethernet Push Notification devices generate a TCP/IP data packet when a change on any of the contact closure inputs is detected. Push Notification devices send data indicating the on/off status of all inputs. The inputs on this controller were designed for contact closure interface applications. Connect the inputs via screw terminals to buttons, switches, magnetic door switches, or any other contact-closure source. NCD Push Notification devices are powered from a 12VDC power supply using a 2.1mm barrel connector or a 2-position screw terminal. On-Board LEDs display communication activity and CPU Busy/Ready status.
Using this device is very easy. Simply connect to using Comm Operator (included with Base Station) or other TCP/IP data monitoring utility. Connect a button or switch between Ground and Input 1 and watch the data arrive in your terminal software. Every time the button is pressed or released, a data frame is generated that includes a byte of data representing the status of all available inputs.
Flip a switch and send a SMS Text Message. Push a Button and Send an email. Trip a sensor and send a message to a server to do just about anything you want. Log when sensors change state or control relays when switches are triggered from distant locations. Push Notification series controllers are the easiest way to send alerts to computers when a switch changes state. The Push Notification series will let you know when a door is opened, a switch is flipped, or motion is detected.
The Inputs on the Push Notification series controllers are compatible with any type of switch, including momentary buttons, toggle switches, motion detectors, magnet sensors, level switches, float switches, break-beam detectors, door sensors, window sensors, glass-breakage detectors, vehicle sensors, fire detectors, gas sensors, and much more.
Using float sensors, Push Notification series controllers can send you a SMS text message if water levels rise too high. Alert emergency responders if fire or gas is detected. Receive instant SMS and email notification if security sensors are triggered. Log sensor activity for scientific, accountability, or security applications. Monitor, React, and Log sensor data as soon as the sensor detects a change. Push Notification series controllers are built to help you stay connected to your world wherever you are.
The Push Notification Series will let you send contact closure sensor data directly to a local computer. From there the data can be used to activate relays, log data, trigger applications, forward data and much more. Monitor your world in real time.
NCD Push Notification series controllers use contact-closure input detection to automatically forwards sensor data to an attached computer. Push Notification controllers do not directly generate Emails or SMS text messages. Optional N-Button software or custom-developed server software is required for this functionality. The Push Notification Quick Start Guide will help you setup your Push Notification Controller for your particular application.
We STRONGLY recommend the use of optional N-Button software in combination with the purchase of Push Notification series controllers. N-Button software is a complete automation software application capable of sending SMS and Email messages, making decisions, controlling relays, and much more. The N-Button development team has been developing automation software for our devices for many years.
N-Button is available as an optional upgrade when you add any Push Notification controller to your shopping cart. N-Button is compatible with Windows 8 or later operating systems.
You can write your own custom software to work with NCD Push Notification controllers. Our products operate using standard protocols, making software integration easy for developers. We help you eliminate the hardware development cycle by providing you with a plug and play solution.
Push Notification series devices allow you to customize 8 bytes in the data packet. Use these data bytes to indicate location, sensor type, or as a security id. Use our Base Station Software (free) to configure optional data bytes.
Control NCD devices using standard Ethernet TCP/IP communications. Simply open a socket and send and receive TCP/IP data to control our devices. Our Ethernet TCP/IP Communication modules feature the Lantronix XPort communications module, the best in the industry. The Lantronix XPort module is an industrial workhorse that we have trusted for many years.
Please note that images above may contain product not included with purchase