Categories


100:1 Micro Metal Gearmotor MP 6V

Product Code: Pololu #2367

100:1 Micro Metal Gearmotor MP 6V
100:1 Micro Metal Gearmotor MP 6V
100:1 Micro Metal Gearmotor MP 6V
100:1 Micro Metal Gearmotor MP 6V
100:1 Micro Metal Gearmotor MP 6V
100:1 Micro Metal Gearmotor MP 6V
100:1 Micro Metal Gearmotor MP 6V

₹1,579.00
GST inclusive



Qty:

Availability: Backorder


Add to Wish List



This gearmotor is a miniature medium-power, 6 V brushed DC motor with a 100.37:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter.

Key specifications:

voltage no-load performance stall extrapolation
6 V 220 RPM, 40 mA 0.94 kg⋅cm (13 oz⋅in), 0.67 A

These tiny brushed DC gearmotors are available in a wide range of gear ratios—from 5:1 up to 1000:1—and with five different motors: high-power 6 V and 12 V motors with long-life carbon brushes (HPCB), and high-power (HP), medium power (MP), and low power (LP) 6 V motors with shorter-life precious metal brushes. The 6 V and 12 V HPCB motors offer the same performance at their respective nominal voltages, just with the 12 V motor drawing half the current of the 6 V motor. The 6 V HPCB and 6 V HP motors are identical except for their brushes, which only affect the lifetime of the motor.

The HPCB versions (shown on the left in the picture below) can be differentiated from versions with precious metal brushes (shown on the right) by their copper-colored terminals. Note that the HPCB terminals are 0.5 mm wider than those on the other micro metal gearmotor versions (2 mm vs. 1.5 mm), and they are about 1 mm closer together (6 mm vs. 7 mm).

 

Dimensions

Size: 10 × 12 × 26 mm1
Shaft diameter: 3 mm2

General specifications

Gear ratio: 100.37:1
No-load speed @ 6V: 220 rpm
No-load current @ 6V: 0.04 A
Stall current @ 6V: 0.67 A
Stall torque @ 6V: 0.94 kg·cm
Max output power @ 6V: 0.50 W
Extended motor shaft?: N
Motor type: 0.67A stall @ 6V (MP 6V)

Performance at maximum efficiency

Max efficiency @ 6V: 33 %
Speed at max efficiency: 170 rpm
Torque at max efficiency: 0.19 kg·cm
Current at max efficiency: 0.17 A
Output power at max efficiency: 0.32 W

Notes:

1.  Output shaft adds 9 mm to the 26 mm length.

2.  D shaft.

 

Write a review
Your Name:


Your Review:
Note: HTML is not translated!
Rating:
Bad           Good

Enter the code in the box below:



© 2021, MG Automation Technologies. Powered by MG Super LABS.Find us on Google+
Designed with by