MD10C is a newer version of the MD10B which is designed to drive high current brushed DC motor up to
10A 13A continuously. It offers several enhancements over the MD10B such as support for both locked-antiphase and sign-magnitude PWM signal as well as using full solid state components which result in faster response time and eliminate the wear and tear of the mechanical relay.
Read User's Review: http://www.robotshop.com/en/cytron-13a-5-30v-single-dc-motor-controller.html
**Note that it is not for "RC PWM"
*MD10C is now Revision 3.0.
* Rev 3.0 can support motor voltage range from 5V to 30V
Bi-directional control for 1 brushed DC motor.
Support motor voltage ranges from
3V 5V to 25V 30V
Maximum current up to
10A 13A continuous and 15A 30A peak (10 seconds).
3.3V and 5V logic level input.
Solid state components provide faster response time and eliminate the wear and tear of mechanical relay.
Fully NMOS H-Bridge for better efficiency and no heat sink is required.
Speed control PWM frequency up to
10KHz 20KHz (Actual output frequency is same as input frequency).
Support both locked-antiphase and sign-magnitude PWM operation.
The new MD10C can be powered from a single power source and external Vin is not required.
Dimension: 75mm x 43mm
* For more information about Revision 2.0 please refer to the User's Manual.
1. MD10C Fast Testing
2. PSC28A – Controlling MD10C and MDS40A
3. SK40C PIC16F887 project 10 - Driving one DC brush motor with MD10C
4. SK40C PIC16F887 project 16 - Driving two DC brush motor with MD10C by using SKPS
5. Controlling MD10C with Arduino, Signed-Magnitude and Locked Anti-phase method
Stress Test in lab: