Categories


32-Channel DPDT Signal Relay Controller with I2C Interface

Product Code: NCD PR2B-16

32-Channel DPDT Signal Relay Controller with I2C Interface
32-Channel DPDT Signal Relay Controller with I2C Interface
32-Channel DPDT Signal Relay Controller with I2C Interface

Call Us
GST inclusive



Qty:

Availability: Backorder


Add to Wish List



This I2C 32-channel DPDT relay controller offers a cross-platform solution with unmatched compatibility and expansion capabilities.  Compatible with every IoT technology that supports I2C communications, this is the most versatile relay controller we have ever manufactured.  All NCD I2C relay controllers have a I2C output, allowing you to chain together more relay controllers, a vast array of sensors, current monitors, PWM drivers, and much more.  The expansion abilities of this relay board are unmatched by any other manufacturer in the world.  On-board DPDT relays are ideally suited for control of telecommunications, audio, and other low-power switching applications. Each DPDT relay contains two separate switches that switch simultaneously with 6 connections for each relay.  DPDT Relays are available in 1, 3, or 5-Amp versions, customized when added to your shopping cart.

This controller is based on dual MCP23017 controllers, a common I2C interface chip for GPIO applications.  In this design, the GPIO port is used to control the on-board DPDT relays.  The I2C bus support up to 8 similar devices (based on the MCP23008 or MCP23017).  This controller counts as two devices on the I2C bus.  Two on-board address jumpers set the I2C start address of both MCP23017 interface chips.  On-board status LEDs display the on/off status of each relay.  This controller may be powered using our optional power supply or with 12VDC and direct screw terminal connection of bare power wires.  Each relay is accessible to the user via screw terminals, capable of accepting 14 AWG wire.

What is the NCD I2C Interface?

NCD is the creator of plug and play modular hardware using the NCD I2C Interface connector standard.  NCD I2C devices allow you to chain together several devices on the I2C bus, and communicate to each device individually at high speed (subject to the limitations of I2C).  The NCD I2C Interface uses a standard 4-Pin I2C Input and I2C Output connector.  NCD I2C devices communicate 5V I2C data and provides 5V DC power through this connector.  NCD I2C devices use standard I2C communications for all data transport, which is supported by nearly every microcontroller in production today.  The NCD I2C Interface is strictly a 5V standard, which is ideal for transport across longer cables.  NCD I2C devices always include a 6″ (152mm) 4-conductor I2C cable.  NCD I2C Mini Modules always include a 3″ (76mm) 4-conductor I2C cable.  Cables and connectors are available separately for designers who would like to include their own NCD I2C Interface into their designs.

Plug and Play Connectivity

NCD I2C devices will plug in to any available NCD I2C Output.  This includes just about everything we make in the NCD IoT Category, including all NCD IoT devices.  We also manufacture a wide range of I2C adapters that make it easy to plug NCD I2C Devices directly into most computing platforms.  The NCD I2C Interface adapters are available for Arduino, Banana Pi, BeagleBone, Bluz, C.H.I.P., ESP8266, Onion Omega, Particle Photon and Electron, PyCom, Raspberry Pi, 2, 3, and Zero, and Windows.  We are always working to add new platform support for NCD I2C devices.  NCD I2C Interface devices are compatible with just about everything in the microcontroller industry.

Unlimited I2C Expansion

Based on our plug-and-play I2C interface standard, all NCD I2C devices are equipped with a I2C output port, making it easy to expand to a wide variety of sensors, current monitors, relay controllers, PWM controllers, and much more!  We are always designing new expansions for our modular plug-and-play I2C framework.  We are dedicated to building a product line of interconnected devices to simplify all forms of automation.  Re-use or upgrade your hardware in seconds by selecting the modules that best fit your needs, and chaining them together using the included I2C expansion cables!

Powering NCD I2C Interface Devices

Some NCD I2C devices require a external power supply, others may be powered through the 4-Pin I2C bus connector at 5VDC, and other devices are jumper selectable between external and I2C bus power.  All I2C mini modules are powered through the 5V I2C bus connector, greatly simplifying connectivity.

1-Amp DPDT Signal Relay Option

This controller offers an optional 1-Amp small signal relay, allowing control of low-power telecommunications signals up to 12VDC at 1 Amp. Ideal for audio, telecommunications, and very low power switching applications. This relay has a low On resistance. The 1-Amp signal relay is of the DPDT variety, which is the same as two SPDT relays that switch simultaneously, but remain isolated from each other. This relay has 6 total user connections, two of each of the following: Common (C), Normally Open (NO), and Normally Closed (NC). Common is connected to NC when the relay is off. Common disconnects from NC and connects to NO when the relay is activated. All connections are made via screw terminals, capable of accepting up to 16 AWG wire.

3-Amp DPDT Signal Relay Option

This controller offers an optional 3-Amp small signal relay, allowing control of low-power telecommunications signals up to 12VDC at 3 Amps. Ideal for audio, telecommunications, and very low power switching applications. This relay has a low On resistance. The 3-Amp signal relay is of the DPDT variety, which is the same as two SPDT relays that switch simultaneously, but remain isolated from each other. This relay has 6 total user connections, two of each of the following: Common (C), Normally Open (NO), and Normally Closed (NC). Common is connected to NC when the relay is off. Common disconnects from NC and connects to NO when the relay is activated. All connections are made via screw terminals, capable of accepting up to 14 AWG wire.

5-Amp DPDT Signal Relay Option

This controller offers an optional 5-Amp signal relay, allowing control of  signals up to 12VDC at 5 Amps. Ideal for audio, telecommunications, and light-duty power switching applications. This relay has a low On resistance. The 5-Amp signal relay is of the DPDT variety, which is the same as two SPDT relays that switch simultaneously, but remain isolated from each other. This relay has 6 total user connections, two of each of the following: Common (C), Normally Open (NO), and Normally Closed (NC). Common is connected to NC when the relay is off. Common disconnects from NC and connects to NO when the relay is activated. All connections are made via screw terminals, capable of accepting up to 14 AWG wire.

Features

  • 32-Channel Relay Controller with I2C Interface
  • Ideal for use with PC using Windows 8/10 via USB
  • Compatible with Arduino, Raspberry Pi, Onion, PyCom
  • MCP23017 I2C Controlled Mechanical DPDT Relays
  • Choose 1, 3, or 5-Amp DPDT Signal Switching Relays
  • I2C Output Port for Adding Sensors, Controllers, or More Relays
  • Wireless Remote Operation with Key Fob Expansion Option
  • Example Libraries Available on GitHub

 

Write a review
Your Name:


Your Review:
Note: HTML is not translated!
Rating:
Bad           Good

Enter the code in the box below:



© 2024, MG Automation Technologies. Powered by MG Super LABS.Find us on Google+
Designed with by