Categories


4x Isolated Solid State Relay Phidget

Product Code: Phidgets REL1100_0

4x Isolated Solid State Relay Phidget
4x Isolated Solid State Relay Phidget
4x Isolated Solid State Relay Phidget
4x Isolated Solid State Relay Phidget
4x Isolated Solid State Relay Phidget
Brand: Phidgets

₹3,299.00
GST inclusive



Qty:

Availability: Backorder


Add to Wish List



The REL1100 is a PWM-enabled solid state relay. The relay is great for controlling LED strips, DC motors, power relays, fans, and other small circuits. This Phidget connects to your computer through a VINT Hub.

Features:

  • Four Relays
  • Control power for a circuit or device up to a maximum of 30V and 8A
  • Pulse Width Modulation - rather than simply switching on or off, you can select a percentage duty cycle to limit the circuit power to a specific level.
  • Low-Side Switching - Each solid state relay switches an external circuit to ground when enabled

Technical Details:

  • Quiet, quick and Long-lasting - Solid-state relays switch silently and quickly, and last much longer than mechanical relays.
  • Isolation - A Power surge on the load side of the relay will not damage the VINT Hub or computer
  • Failsafe Protection - Set the device to turn off automatically if your program becomes unresponsive

Product Specifications

Board Properties
Controlled By VINT
Electrical Properties
Current Consumption Min 3.5 mA
Current Consumption Max 4 mA
Load Voltage Max (DC) 30 V DC
Load Current Max (DC) 8 A
Switching Power Max (Real) * 240 W
Relay Properties
Number of Relays 4
Contact Resistance Max 35 mΩ
Turn-off Time Max 100 ns
Switch Type SPST Normally Open MOSFET
Turn-on Time Max 100 ns
PWM Resolution 0.1 %
PWM Frequency Max ** 20 kHz
PWM Frequency Min ** 100 Hz
Physical Properties
Recommended Wire Size 16 - 26 AWG
Operating Temperature Min -40 °C
Operating Temperature Max 85 °C
Customs Information
Canadian HS Export Code 8536.41.00
American HTS Import Code 8536.41.00.50
Country of Origin CN (China)

* Note: At switching powers powers higher than 50W, external cooling may be required. For high power applications, a hockey-puck style SSR may be more appropriate. See the "Other Relays" tab for more details.

** - PWM frequency can only be adjusted on firmware version 120 or newer. You can upgrade firmware by double-clicking on a device in the Phidget Control panel after updating to the latest version of our drivers.

Documents

Product History

Date Board Revision Device Version Comment
June 2017 0 100 Product Release
May 2019 0 110 Added failsafe timer functionality
February 2020 0 120 Added ability to set PWM frequency; see API for details
Write a review
Your Name:


Your Review:
Note: HTML is not translated!
Rating:
Bad           Good

Enter the code in the box below:



© 2024, MG Automation Technologies. Powered by MG Super LABS.Find us on Google+
Designed with by