Categories


A4988 Stepper Motor Driver Carrier, Black Edition (Bulk, Header Pins Soldered)

Product Code: Pololu #2986

A4988 Stepper Motor Driver Carrier, Black Edition (Bulk, Header Pins Soldered)
A4988 Stepper Motor Driver Carrier, Black Edition (Bulk, Header Pins Soldered)
A4988 Stepper Motor Driver Carrier, Black Edition (Bulk, Header Pins Soldered)
A4988 Stepper Motor Driver Carrier, Black Edition (Bulk, Header Pins Soldered)

₹679.00
GST inclusive



Qty:

Availability: Backorder


Add to Wish List



Description

This is a bulk-packaged version of our Black Edition A4988 Stepper Motor Driver Carrier that ships with 0.1″-pitch male header pins installed as shown in the main product picture, so no soldering is required to use it with an appropriate 16-pin socket or solderless breadboard. Please see the Black Edition A4988 Stepper Motor Driver Carrier product page for more information about the driver.

Dimensions

Size: 0.6″ × 0.8″

General specifications

Minimum operating voltage: 8 V
Maximum operating voltage: 35 V
Continuous current per phase: 1.2 A1
Maximum current per phase: 2 A2
Minimum logic voltage: 3 V
Maximum logic voltage: 5.5 V
Microstep resolutions: full, 1/2, 1/4, 1/8, and 1/16
Reverse voltage protection?: N
Bulk packaged?: Y
Header pins soldered?: Y

Notes:

1. Without a heat sink or forced air flow.

2. With sufficient additional cooling.

Write a review
Your Name:


Your Review:
Note: HTML is not translated!
Rating:
Bad           Good

Enter the code in the box below:



© 2019, MG Automation Technologies. Powered by MG Super LABS.Find us on Google+
Designed with by