The Arty S7 board features new Xilinx Spartan-7 FPGA and is the latest member of the Arty family for Makers and Hobbyists.
The Spartan-7 FPGA offers the most size, performance, and cost-conscious design engineered with the latest technologies from Xilinx and is fully compatible with Vivado Design Suite. Putting this FPGA in the Arty form factor provides users with a wide variety of I/O and expansion options. Use the dual row Arduino® connectors to mount one of the hundreds of hardware compatible shields available, or use the Pmod ports with Digilent's pre-made Pmod IP blocks for a more streamlined design experience. Arty S7 was designed to be MicroBlaze ready and comes out of the box ready to use with Xilinx's WebPACK licensing.
Arty S7 block diagram.
The official distribution channel for the Arty S7 board is through Avnet and Digilent only. For this reason, we cannot provide distributor discounts for the Arty S7 board.
Arty S7 comes in two FPGA variants: Arty S7-25 features Xilinx XC7S25-CSGA324. Arty S7-50 features the larger Xilinx XC7S50-CSGA324. Arty S7 has the features listed below:
|Arty S7-25||Arty S7-50|
|1 MSPS On-chip ADC||Yes||Yes|
|Block RAM (Kbits)||1,620||2,700|
|Clock Management Tiles||3||5|
Internal clock speeds exceeding 450MHz;
On-chip analog-to-digital converter (XADC).
Programmable over JTAG and Quad-SPI Flash
256 MB DDR3L with a 16-bit bus @ 650 MHz
128 Mbits Quad-SPI Flash
USB-JTAG Programming circuitry (USB Micro cable required, NOT INCLUDED).
Powered from USB or any 7V-15V source
Interaction and Sensory Devices
1 Board Reset Button
4 Green LEDs
2 RGB LEDs
Arduino/chipKIT Shield connector
For all other material: