Atlas Scientific Surveyor™ Analog Dissolved Oxygen Kit
Product Code: AS GRV-DO
Datasheets
Videos
Dissolved Oxygen | Common Mistakes | Air Bubble- Dissolved Oxygen | Common Mistakes | Stagnant vs Moving Water
- Dissolved Oxygen | Common Mistakes | Damaged Membrane
Tools
Basic Sample Code
Certificates
3D files
(Previously known as the Gravity Dissolved Oxygen Meter )
Although Dissolved Oxygen is a complex measurement, it doesn’t always have to be. Some applications only need to know the presence of oxygen in percent saturation. If you are looking for basic measurements that you can rely on, The Atlas Scientific Surveyor™ Dissolved Oxygen Meter is your solution. This device outputs an analog voltage from 10mV – 1,000mV and gives D.O. readings in percent saturation only.
| Reads | Dissolved Oxygen |
| Range | 0 − 700% saturation |
| Accuracy | +/– 2% |
| Response time | Continuous analog output |
| Supported probes | Any galvanic probe |
| Calibration | Optional |
| Temp. compensation | No (unnecessary) |
| Data protocol | Analog ~0 − ~3,000mV |
| Surveyor™ dimensions | 56.2mm x 32mm (2.2″ x 1.2″) |
| Weight: | 15 grams |
| The Surveyor™ Analog Dissolved Oxygen Meter comes with (4) standoffs and screws, (1) 3 pin jumper cable |
Write a review
Your Name:
Your Review:
Note: HTML is not translated!
Rating:
Bad
Good
Enter the code in the box below:
© 2025, MG Automation Technologies. Powered by MG Super LABS.Find us on Google+
Designed with by Ish Gupta