Categories


Phidgets 4-20mA Adapter

Product Code: Phidgets 1132_0

Phidgets 4-20mA Adapter
Brand: Phidgets

₹3,459.00
GST inclusive



Qty:

Availability: 1 In Stock


Add to Wish List



Description

A common output mode for industrial sensors is 4-20mA. This adapter lets you use 4-20mA sensors with an Analog Input or VINT Hub port.

The 4-20mASensors can be connected to and powered by the provided terminals on the 4-20mA Adapter board. The 1132 will measure the current passing through the attached sensor and convert it to a voltage, where it can be displayed as a SensorValue by a Phidget Interface board.

The 4-20 mA Adapter board internally produces +15V from the Phidget InterfaceKit’s input analog voltages which is used to power the connected sensor, eliminating the need for an external power supply.

If the Adapter board is being used in very noisy environments, place a ferrite bead on the sensor current loop close to where it is attached to the 1132.

Product Specifications

Sensor Properties
Controlled By Voltage Input (0-5V)
Sensor Output Type Non-Ratiometric
Electrical Properties
Output Impedance 1 kΩ
Available External Voltage 15 V DC
Current Consumption Min 1.8 mA
Current Consumption (4mA Load) 18.4 mA
Current Consumption (22mA Load) 130 mA
Inrush Current Max (Hot Plug) 160 mA
Supply Voltage Min 4.8 V DC
Supply Voltage Max 5.3 V DC
Capacitive Load Max 1.5 μF
Measurement Error Max ± 1.2 %
Physical Properties
Recommended Wire Size 12 - 24 AWG
Operating Temperature Min -40 °C
Operating Temperature Max 85 °C

Documents

 

 

Write a review
Your Name:


Your Review:
Note: HTML is not translated!
Rating:
Bad           Good

Enter the code in the box below:



© 2022, MG Automation Technologies. Powered by MG Super LABS.Find us on Google+
Designed with by