Categories


BeagleBone Green Wireless

Product Code: Seeed 102010048

BeagleBone Green Wireless
BeagleBone Green Wireless
BeagleBone Green Wireless
BeagleBone Green Wireless
Brand: Seeedstudio

₹5,809.00
GST inclusive



Qty:

Availability: Backorder


Add to Wish List



SeeedStudio BeagleBone Green Wireless is a joint effort by BeagleBoard.org and Seeed Studio. Based on the open-source hardware design of BeagleBone Black, the newest BBGW has added two Grove connectors, making it easier to connect to the large family of Grove sensors. It is the first Wi-Fi + Bluetooth Low Energy (BLE) board from BeagleBone community.

Key Features

  • The first Wi-Fi + Bluetooth Low Energy (BLE) board from BeagleBone community
  • Built-in 2.4 GHz TI WLinkTM8 Module with two antenna solution
  • Onboard chip antenna
  • IEEE 802.11b/g/n compliant
  • FCC, IC, ETSI/CE, and TELEC certified
  • Supports AP+STA mode of communication
  • Comply with Bluetooth Advanced Audio Distribution Profile (A2DP)
  • Supports MRAA library

Specifications

Boards Comparison

BeagleBone Black
 

SeeedStudio BeagleBone Green
 

SeeedStudio BeagleBone Green Wireless
 

• Processor: AM3358 1GHz ARM® Cortex-A8 • Processor: AM3358 1GHz ARM® Cortex-A8 • Processor: AM3358 1GHz ARM® Cortex-A8
• 512MB DDR3 RAM • 512MB DDR3 RAM • 512MB DDR3 RAM
• 4GB 8-bit eMMC on-board flash storage • 4GB 8-bit eMMC on-board flash storage • 4GB 8-bit eMMC on-board flash storage
• 3D graphics accelerator • 3D graphics accelerator • 3D graphics accelerator
• NEON floating-point accelerator • NEON floating-point accelerator • NEON floating-point accelerator
• 2x PRU 32-bit microcontrollers • 2x PRU 32-bit microcontrollers • 2x PRU 32-bit microcontrollers
• USB client for power & communications • USB client for power & communications • USB client for power & communications
• 1x USB host • 1x USB host • 4x USB2.0 host
• Ethernet • Ethernet • Wi-Fi 802.11b/g/n 2.4GHz and Bluetooth 4.1 LE
• 2x46 pin headers • 2x46 pin headers • 2x46 pin headers
• HDMI port • 2xGrove connectors • 2xGrove connectors

Technical Details

Dimensions 126mm x 76mm x 24mm
Battery Exclude
Processor AM335x 1GHz ARMR Cortex-A8
RAM 512MB DDR3
on-board Flash Storage 4GB eMMC
CPU Supports NEON floating-point & 3D graphics accelerator
Micro USB Supports powering & communications
USB 4 x USB2.0 Host
Grove Connectors 2 x (One I2C and One UART)
GPIO 2 x 46 pin headers
Ethernet Wi-Fi 802.11b/g/n 2.4GHz and Bluetooth 4.1 LE
Operating Temperature 0 ~ 75℃

Part List

  • SeeedStudio BeagleBone Green Wireless x 1
  • USB Cable x 1
  • User Guide x 1

Documents

Write a review
Your Name:


Your Review:
Note: HTML is not translated!
Rating:
Bad           Good

Enter the code in the box below:



© 2024, MG Automation Technologies. Powered by MG Super LABS.Find us on Google+
Designed with by