Categories


mikroProg for PIC, dsPIC and PIC32

Product Code: MIKROE-764

mikroProg for PIC, dsPIC and PIC32
mikroProg for PIC, dsPIC and PIC32
mikroProg for PIC, dsPIC and PIC32

₹10,399.00
GST inclusive



Qty:

Availability: Backorder


Add to Wish List



mikroProg for PIC. dsPIC, PIC24 and PIC32

mikroProg for PIC, dsPIC and PIC32 is a fast USB 2.0 programmer with mikroICD™ hardware In-Circuit Debugger. Smart engineering allows mikroProg to support PIC10, PIC12, PIC16, PIC18, dsPIC30/33, PIC24 and PIC32 devices in a single programmer! It supports over 1000 microcontrollers from Microchip. Outstanding performance, easy operation and elegant design are it’s top features. Debug your code and monitor code execution on the chip itself. mikroProg™ technology brings the power of hardware debugging to your favorite compiler.

Compiler Compatibility mikroProg™ is supported with mikroC™, mikroBasic™ and mikroPascal™ compilers for PIC®, dsPIC® and PIC32®. Choose the flavor that you like the most.

Faster programming

We have done major enhancements in programming and debugging algorithms, and boosted programmer electronics to make it all possible. And the results are stunning! mikroProg™ is up to 400% faster than LvPICFlash.

SingleClick™ Debugging

mikroProg™ has native support for mikroICD™ - hardware step-by-step In-Circuit Debugging in mikroElektronika compilers. It supports Step-over [F8], Step-into[F7], Step-out[Ctrl+F8], Run[F6] Run To Cursor[F4] debugging operations, as well as standard and advanced breakpoints.

One firmware for all devices

With mikroProg™, single firmware takes care of all supported architectures. Supporting new microcontrollers is easy. Just by downloading the latest version of mikroProg Suite™ your programmer is ready to program new devices.

Power your target board

mikroProg™ can provide power supply to your target board. Using mikroProg Suite™ Software, or directly from your compiler you can set the voltage level to be generated for you. It can provide up to 150mA of current in the voltage range from 1.8–5V.

Compatible with PICFlash

If you have already integrated previous programmer connector in your device, don’t worry. mikroProg™ retained the original connector pinout. Use front row of the connector (next to the knob) when programming mikromedia boards.

You won’t rip out the cable

How many times have you pulled the cable out of some device accidently and it just stopped working? We made sure to provide a secure connection of programer cable and created a holder to tie it firmly into place.

Package Contains

  • Damage resistant protective box
  • mikroProg™ programmer with mikroICD™ support
  • USB cable
  • User Manual

Specification

Applications Hardware Debugging
Architecture dsPIC/PIC24 (16-bit),PIC (8-bit),PIC32 (32-bit)
MCU Support for PIC10®, PIC12®, PIC16®, PIC18®, dsPIC30/33®, PIC24® and PIC32® devices
Key Features mikroProg™ is supported with mikroC™, mikroBasic™ and mikroPascal™ compilers for PIC®, dsPIC® and PIC32®
Key Benefits It supports over 897 microcontrollers from Microchip
Input Voltage 5V (via USB)
Compatibility IDC10

Downloads

 Drivers for mikroProg Suite

 mikroProg Suite for PIC User Manual

 mikroProg for PIC User Manual

 mikroProg - mikroICD User Manual

 mikroProg Firmware upgrade guide

 mikroProg Suite for PIC, dsPIC, PIC32 v260

Write a review
Your Name:


Your Review:
Note: HTML is not translated!
Rating:
Bad           Good

Enter the code in the box below:



© 2024, MG Automation Technologies. Powered by MG Super LABS.Find us on Google+
Designed with by