This DC Voltage sensor measures DC voltage up to 200V. Powered by an external 12VDC power supply, the DC Voltage Sensor provides a 0 to 5VDC analog signal that is linearly proportional to the voltage measured at the terminal blocks.
The DC Voltage Sensor can easily be mounted using the screw holes, or on a 35mm wide DIN rail for quick installation. The terminal blocks accommodate conductors of up to AWG #16.
The voltage sensor connects to an analog input on Phidgets I/O boards. The formula to translate the output voltage into measured voltage is:
V = Vout * 40
You can use a 12V sensor adapter to connect this sensor to your InterfaceKit or Hub. See the Connection & Compatibility tab for more details.
|Sensor Type||Voltage (DC)|
|Sensor Output Type||Non-Ratiometric|
|Input Voltage Min (DC)||0 V DC|
|Input Voltage Max (DC)||200 V DC|
|Measurement Error Max||0.5 %|
|Sensor Response Time Max||400 ms|
|Supply Voltage Min||12 V DC|
|Supply Voltage Max||12 V DC|
|Current Consumption Max||4.2 mA|
|Isolation Voltage (DC)||2.5 kV DC|
|Output Voltage Min||0 V DC|
|Output Voltage Max||5 V DC|
|Recommended Wire Size||12 - 24 AWG|
|Operating Temperature Min||0 °C|
|Operating Temperature Max||50 °C|