Bluetooth 4.0 Low Energy - BLE Mini

Product Code: RBL WLS01311P

Bluetooth 4.0 Low Energy - BLE Mini
Bluetooth 4.0 Low Energy - BLE Mini
Brand: Seeedstudio

GST inclusive


Availability: 3 In Stock

Add to Wish List

You can now utilize Bluetooth 4.0 Low Energy (BLE) technology easily in your project with our BLE Mini. BLE Mini requires only a serial port for communication so it supports all major development platforms that have UART interface including Arduino, Raspberry Pi, Netduino, BeagleBone etc. In addition, we provide you with access to all Ti's CC2540 I/O pins and the ability to upload firmware via USB, making the BLE Mini an ideal development/protoyping board for your BLE project/accessory/Appcessory.
An iPhone 5, iPhone 4S, iPad mini, iPad with Retina display (4th gen), iPad (3rd gen) or iPod touch (5th gen) plus our App from iTunes App Store. You could also develop your own iOS App using our open source SDK or iOS's CoreBluetooth Framework.
Or a second BLE Mini (require Central role support which will be available in March 2013)
Simple interface - with our pre-loaded firmware code name 'Biscuit', you could easily connect to any development board or IC with UART interface.
Compact form factor - this is a very popular request from makers using smaller Arduino boards like Arduino Mini/Micro/Nano/Pro Mini etc.
Support Central or Peripheral role - it can connect to other BLE Mini or BLE Shield, not just iOS device. (Central role support will be available in March 2013)
Standalone operation - Ti's CC2540 is a SoC (System-on-Chip) IC that can operate without any external microcontroller. You can develop your own firmware using IAR Embedded Workbench, all I/O pins of CC2540 are accessible.
Firmware upgradable - develop your own or download a "pre-packaged" firmware and upload to  BLE Mini via the USB connector, Ti CC Debugger is not required.
Provision for connection to external antenna.
Texas Instruments CC2540 2.4 GHz Bluetooth System-on-Chip (SoC)
Certified Bluetooth Low Energy 4.0 Module with on-board chip antenna 
Dimension- 39mm x 18.5mm
Powering options - 3.4V to 11V VIN / 5V USB / Coin Cell Battery / 3.7V Li-ion Battery 
On-board programmable components - 512Kb EEPROM, 2 LEDs (Blue & Green), Push Button
Accessories included - Coin Cell Battery holder & 3 connectors 
Please visit RedBearLab for more info about this product and technical support.

Write a review
Your Name:

Your Review:
Note: HTML is not translated!
Bad           Good

Enter the code in the box below:

© 2021, MG Automation Technologies. Powered by MG Super LABS.Find us on Google+
Designed with by