Categories


Pololu Ball Caster with 3/8″ Metal Ball

Product Code: Pololu #951

Pololu Ball Caster with 3/8″ Metal Ball
Pololu Ball Caster with 3/8″ Metal Ball
Pololu Ball Caster with 3/8″ Metal Ball
Pololu Ball Caster with 3/8″ Metal Ball

₹199.00
GST inclusive



Qty:

Availability: 7 In Stock


Add to Wish List



This small ball caster uses a 3/8″ diameter metal ball. The height of the assembled kit ranges from 0.4″ to 0.6″.

This ball caster kit includes a black ABS housing, a 3/8″ diameter metal ball, two spacers (1/16″ and 1/8″ thick), and two #2 screw sets. The total height of the ball caster, 0.4″, can be increased to about 0.6″ using the included spacers. The two included #2 screws can be used to mount the ball caster to your chassis (the distance between the screw holes is 0.53″).

Note that our ball casters are designed for small robots; they are not intended to bear more than a few pounds. With more weight than this, friction between the ball and the housing will probably keep it from rolling well.

Comparison of Pololu ball casters

Pololu ball casters with plastic and metal balls. Ball diameter from left to right: 1″, 3/4″, 1/2″, and 3/8″.

Dimensions

Ball diameter: 0.375 in

General specifications

Ball material: metal

Notes:

Without screws or spacers.

Write a review
Your Name:


Your Review:
Note: HTML is not translated!
Rating:
Bad           Good

Enter the code in the box below:



© 2020, MG Automation Technologies. Powered by MG Super LABS.Find us on Google+
Designed with by