Categories


ESP8266 WiFi Module for Raspberry Pi Pico, Supports TCP/UDP Protocol

Product Code: Waveshare 20182

ESP8266 WiFi Module for Raspberry Pi Pico, Supports TCP/UDP Protocol
ESP8266 WiFi Module for Raspberry Pi Pico, Supports TCP/UDP Protocol
ESP8266 WiFi Module for Raspberry Pi Pico, Supports TCP/UDP Protocol
ESP8266 WiFi Module for Raspberry Pi Pico, Supports TCP/UDP Protocol
ESP8266 WiFi Module for Raspberry Pi Pico, Supports TCP/UDP Protocol
ESP8266 WiFi Module for Raspberry Pi Pico, Supports TCP/UDP Protocol

₹989.00
GST inclusive



Qty:

Availability: 2 In Stock


Add to Wish List



Features At A Glance:

The Pico-ESP8266 is a WiFi expansion module designed for Raspberry Pi Pico, which can be controlled via UART AT command, and supports TCP/UDP communication protocol. It is an easy solution to enable WiFi feature for Raspberry Pi Pico, suitable for sorts of IoT communication projects.

  • Standard Raspberry Pi Pico header, supports Raspberry Pi Pico series
  • UART communication, controlled via AT command, helps you get started quickly
  • Supports STA, AP, and STA+AP three WiFi operating modes, embedded LWIP protocol stack, supports TCP/UDP communication
  • Based on ESP8266 module, four-layers process, enhanced impedance matching, stronger signal, more stable connection
  • 2x functional buttons, convenient for user to update AT firmware through Raspberry Pi Pico
  • Comes with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples)

Specifications:

COMMUNICATION INTERFACE UART
UART BAUDRATE 115200 bps
WIFI STANDARD IEEE 802.11b/g/n
FREQUENCY RANGE 2400 ~ 2483.5 MHz
WIFI OPERATING MODE WiFi STA, WiFi AP, WiFi STA+AP
ANTENNA PCB antenna
OPERATING VOLTAGE 3.3 V
OPERATING TEMPERATURE -40℃ ~ 85℃
DIMENSIONS 58 × 25 mm

Raspberry Pi Pico Header Compatibility:

Onboard Female Pin Header For Direct Attaching To Raspberry Pi Pico

Raspberry Pi Pico is NOT included.

What's On Board:

  1. ESP8266 module
  2. ESP8266 reset button
    connects to ESP8266 reset pin

 

  1. ESP8266 BOOT button
    connects to ESP8266 GPIO 0, press to enter awaiting download mode while reseting
  2. SPX3819M5
    3.3V linear regulator

Pinout Definition:

Outline Dimensions:

Resources & Services:

WIKI: Pico-ESP8266

* Resources for different product may vary, please check the wiki page to confirm the actually provided resources.

Write a review
Your Name:


Your Review:
Note: HTML is not translated!
Rating:
Bad           Good

Enter the code in the box below:



© 2022, MG Automation Technologies. Powered by MG Super LABS.Find us on Google+
Designed with by