EZO Complete-Conductivity™
Product Code: AS EZO-COM-EC
The EZO-Complete USB Conductivity meter makes building a custom monitoring system easy. Simply connect the EZO-Complete to a PC and install the free Atlas Desktop software. Connect multiple EZO-Complete conductivity modules to read conductivity from multiple locations. Embedded systems engineers can use EZO-Complete Conductivity with any USB-enabled microcontroller. EZO-Complete will create a virtual comport and is controlled using simple serial strings.
| Reads | Conductivity = μS/cm |
| Total dissolved solids = ppm | |
| Salinity = PSU (ppt) 0.00 – 42.00 | |
| Specific gravity (sea water only) = 1.00 – 1.300 | |
| Range | 0.07 − 500,000+ μS/cm |
| Accuracy | +/ – 2% |
| Response time | 1 reading per sec |
| Supported probes | K 0.1 – K 10 any brand |
| Calibration | 2 or 3 point |
| Temp. compensation | Yes |
| International standard | ISO 7888 compliant (determination of electrical conductivity) |
| Dimensions | 75.7mm x 54.3mm (2.9″ x 2.1″) |
| Weight | ~54 grams |
| Data protocol | Serial strings through FTDI virtual comport |
| Data format | ASCII |
| Operating voltage | 5V USB |
Datasheet for Engineers
Instructions for use with Atlas Desktop
Downloads
Documents
Certificates
3D file
Write a review
Your Name:
Your Review:
Note: HTML is not translated!
Rating:
Bad
Good
Enter the code in the box below:
-
₹14,799.00
© 2025, MG Automation Technologies. Powered by MG Super LABS.Find us on Google+
Designed with by Ish Gupta