Categories


FireBeetle Covers-Gravity I/O Expansion Shield

Product Code: DFR0483

FireBeetle Covers-Gravity I/O Expansion Shield
FireBeetle Covers-Gravity I/O Expansion Shield
FireBeetle Covers-Gravity I/O Expansion Shield
FireBeetle Covers-Gravity I/O Expansion Shield
FireBeetle Covers-Gravity I/O Expansion Shield
Brand: DF Robot

₹689.00
GST inclusive



Qty:

Availability: Backorder


Add to Wish List



INTRODUCTION

DFRobot FireBeetle series is the low-power consumption micro-controller intentionally designed for Internet of Things (IoT). The series micro-controllers aims at IoT node of low-power consumption, attending to build the IoT hardware platform quickly and conveniently. There are three types of FireBeetle, containing Boards (main control), Covers (expansion boards) and related Accessories.
FireBeetle Covers-Gravity I/O Expansion Shield is an adapter for Gravity sensors and modules. With this shield, you can achieve convenient connection between Gravity sensors and FireBeetles. Every sensor will have its independent power pins.

FireBeetle Gravity I/O Expansion Shield
FireBeetle Gravity I/O Expansion Shield
Note: Please pay attention that the working voltage is 3.3V only. (Red pins)

Project 1. FireBeetle Board-ESP32 Tutorials: Reforming a Small electric Fan

The instrument not just can record steps (and calories) at real time, but show time. What is special is that the format of showing is pointer.

Hardware in need:

Project 2. Application Tutorials of FireBeetle Board - ESP32 BLE: Smarten a Plugboard

What you have seen is a smart plugboard that converted by ESP32 master board and controlled by BLE of ESP32.

Hardware in need:

FEATURES

  • DFRobot FireBeetle Compatible
  • Gravity interface, plug and play, easy to use
  • Cost-effective
  • Small size, convenient to install

SPECIFICATION

  • Input voltage:3.7V~5.5V (VCC)
  • Output voltage:3.3V
  • Supports low-power consumption Mode: POWER_EN = LOW
  • Support maximum discharge current: 600mA(Output voltage: LDO-3.3V )
  • Interface: Gravity standard interface
  • Digital I/O Pins: 10
  • Analog Input Pins: 5
  • Supports I2C x1
  • Supports UART x1
  • Supports SPI x1
  • Dimension: 29.00×58.00mm/1.14 x 2.28ches

DOCUMENTS

SHIPPING LIST

  • FireBeetle Covers-Gravity I/O Expansion Shield x1
  • 18 pin-2.54mm pin x2
  • 18 pin-2.54mm long pin header x2
Write a review
Your Name:


Your Review:
Note: HTML is not translated!
Rating:
Bad           Good

Enter the code in the box below:



© 2020, MG Automation Technologies. Powered by MG Super LABS.Find us on Google+
Designed with by