Luminosity sensor probe

Product Code: CH-9325-P

Luminosity sensor probe
Luminosity sensor probe

GST inclusive


Availability: Backorder

Add to Wish List

Sensor specifications (Luxes accuracy)

Dynamic range: 0.1 to 40000 Lux

Spectral range: 300 – 1100 nm

Voltage range: 2.7 – 3.6 V

Operating temperature: -30 ºC to +80 ºC

Typical consumption: 0.24 mA

Maximum consumption: 0.6 mA

Usage: Indoors and outdoors

This is a light-to-digital converter that transforms light intensity into a digital signal output. This device combines one broadband photo-diode (visible plus infrared) and one infrared-responding photo-diode on a single CMOS integrated circuit capable of providing a near-photopic response over an effective 20-bit dynamic range (16-bit resolution). Two integrating ADCs convert the photo-diode currents to a digital output that represents the irradiance measured on each channel. This digital output in lux is derived using an empirical formula to approximate the human eye response.

Write a review
Your Name:

Your Review:
Note: HTML is not translated!
Bad           Good

Enter the code in the box below:

© 2020, MG Automation Technologies. Powered by MG Super LABS.Find us on Google+
Designed with by