7inch Resistive Touch LCD 800x480

Product Code: Waveshare 8385

7inch Resistive Touch LCD 800x480
7inch Resistive Touch LCD 800x480
7inch Resistive Touch LCD 800x480

GST inclusive


Availability: Backorder

Add to Wish List

Key Parameters

LCD Interface 24-bit parallel
Touch Screen Interface 4 wires, resistive
Backlight LED
Display Size (mm) 154.08 (W) × 85.92 (H)
Dot Pitch (mm) 0.0642 (W) × 0.1790 (H)
Aspect Ratio 8 : 5
Resolution 800 * 480 (Pixel)
Power Consumption TBD
Backlight Current TBD
Operating Temp. (℃) TBD


Interface Definition

Pin No. Symbol Description Type Function
1 VLED- Backlight negative input Backlight negative, connects to GND or PWM control
2 VLED+ Backlight Positive input Backlight Positive, 5V typical
3 GND Ground input Ground
4 VCC Power supply input Power supply, 3.3V
5 R0 Data pin input Red data
6 R1
7 R2
8 R3
9 R4
10 R5
11 R6
12 R7
13 G0 Data pin input Green data
14 G1
15 G2
16 G3
17 G4
18 G5
19 G6
20 G7
21 B0 Data pin input Blue data
22 B1
23 B2
24 B3
25 B4
26 B5
27 B6
28 B7
29 GND Ground input GND
30 DCLK LCD clock input LCD clock signal
31 DISP Enable backlight control input Typically connects to VCC
32 HSYNC Horizontal Synchronization input Horizontal synchronous signal input
33 VSYNC Vertical Synchronization input Vertical synchronous signal input
34 DE Control mode selection input DE = 0 : SYNC mode
DE = 1 : DE mode
35 NC      
36 GND Ground input GND
37 X+ Touch screen X+ output Resistive touch screen X+ analog output
38 Y- Touch screen Y- output Resistive touch screen Y- analog output
39 X- Touch screen X- output Resistive touch screen X- analog output
40 Y+ Touch screen Y+ output Resistive touch screen Y+ analog output


  1. 7inch Resistive Touch LCD x1
  2. 40-pin FFC x1


Development resources:datasheets, etc.


External Dimension

7inch Resistive Touch LCD external dimension


This item is compatible with the following products:

  • DVK521
  • DVK530
  • Open4357-C
  • x210ii
Write a review
Your Name:

Your Review:
Note: HTML is not translated!
Bad           Good

Enter the code in the box below:

© 2020, MG Automation Technologies. Powered by MG Super LABS.Find us on Google+
Designed with by