Categories


6DOF IMU 2 click

Product Code: MIKROE-2337

6DOF IMU 2 click
6DOF IMU 2 click
6DOF IMU 2 click
6DOF IMU 2 click

₹2,519.00
GST inclusive



Qty:

Availability: Backorder


Add to Wish List



The IMU consists of a state-of-the-art 3-axis, low-g accelerometer, and a low-power 3-axis gyroscope, designed for 6-axis and 9-axis applications. The BMI160 also includes built-in power management unit (PMU) for advanced power management and power-saving modes, as well as allocated FIFO buffer of 1024 bytes for handling external sensor data.

6DOF IMU 2 click communicates with the target MCU through the I2C or SPI bus (user-selectable), with additional functionality provided by the INT pin (for enhanced autonomous motion detection).
The board is designed to use a 3.3 power supply only.

Specification

Type Motion
Applications Game controllers, remote controls and pointing devices
On-board modules Bosch's BMI160 low power inertial measurement unit (IMU)
Key Features Interrupts for motion detection
Key Benefits Capable of handling external sensor data, Android Lollipop compatible
Interface GPIO,I2C,SPI
Input Voltage 3.3V
Compatibility mikroBUS
Click board size M (42.9 x 25.4 mm)

Features and usage notes

  • Integrated 1024 byte FIFO buffer
  • Fast start-up mode
  • Additional secondary high speed interface for OIS applications
  • Hardware sensor time-stamps for accurate sensor data fusion
  • Motion detection and tap or double tap sensing
  • I2C and SPI interfaces
  • Very low power consumption: typ. 925 μA
  • 3.3V Power supply
  • 2.5 × 3.0 × 0.83 mm 3 LGA package

Programming

Code snippet demonstrates initialization of the 6DOF IMU 2, reading gyro and accel data, and printing them out on TFT.

 1 void main() 
 2 {
 3 
 4     Display_Init();
 5     I2C1_Init();
 6     dof6_hal_init(BMI160_I2C_ADDRESS );
 7     dof6_sensor_config(accel_normal , gyro_normal);
 8 
 9     while (1)
10     {
11         acc_x=dof6_get_acc_x();
12         acc_y=dof6_get_acc_y();
13         acc_z=dof6_get_acc_z();
14         gyro_x=dof6_get_gyr_x();
15         gyro_y=dof6_get_gyr_y();
16         gyro_z=dof6_get_gyr_z();
17         display_data();
18         Delay_ms(50);
19     }
20 }

Downloads

 6DOF IMU 2 click Examples 

 BMI160 datasheet

 6DOF IMU 2 click schematic

Write a review
Your Name:


Your Review:
Note: HTML is not translated!
Rating:
Bad           Good

Enter the code in the box below:


Tags: 6DOF, IMU, 2, click, MIKROE, 2337,

© 2024, MG Automation Technologies. Powered by MG Super LABS.Find us on Google+
Designed with by