Categories


OAK-D W PoE

Product Code: Luxonis-A00575

OAK-D W PoE
Brand: Luxonis

₹43,899.00
GST inclusive



Qty:

Availability: Backorder


Add to Wish List



Overview :

The OAK-D W PoE is a Wide Field of View (FoV) version of the OAK-D S2 PoE.

It also has industrial M12 PoE connector (instead of RJ45) and additionally features M8 connector for IO connectivity; USB2 (D+, D-), camera IOs (FSIN, STROBE), power, and one auxiliary GPIO.

Hardware specifications :

This OAK camera uses Power-over-Ethernet (PoE) for communication and power. It offers full 802.3af and Class 3 PoE compliance with 1000BASE-T speeds (1 Gbps). A PoE injector/switch is required to power the device.

Sensor specifications : 

Wide FOV IMX378

For the wide FOV version you can select either 120° DFOV IMX378 (12MP) or 150° DFOV color OV9782 (1MP) color camera.

Camera Specs

Color camera

Stereo pair

Sensor

IMX378

OV9282

Shutter

rolling

global

FOV (D/H/V)

120°/108°/93°

150°/127°/79.5°

Rectified Depth FOV

 

106°/97°/70°

Resolution

12MP (4032x3040)

1MP (1280x800)

Focus

FF: 50cm - ∞

FF: 19.6cm - ∞

Max Framerate

60 FPS

120 FPS

Pixel size

1.55µm x 1.55µm

3µm x 3µm

Wide FOV OV9782

Camera Specs

Color camera

Stereo pair

Sensor

OV9782

OV9282

Shutter

global

global

FOV (D/H/V)

150°/127°/79.5°

150°/127°/79.5°

Rectified Depth FOV

 

106°/97°/70°

Resolution

1MP (1280x800)

1MP (1280x800)

Focus

FF: 19.6cm - ∞

FF: 19.6cm - ∞

Max Framerate

120 FPS

120 FPS

Pixel size

3µm x 3µm

3µm x 3µm

Wide FOV lenses can only be fixed-focus

Wide FOV lenses (right)

Left: normal FOV, Right: Wide FOV

Myriad X inside

This OAK device has on-board Myriad X VPU 

Auxiliary M8 connector :

../_images/m8-connector.jpeg

Pin

Function

Additional information

1

AUX GPIO 3V3

3V3 auxiliary GPIO. Pull this pin high with 10k resistor at startup for USB boot.

2

FSYNC ISO

Isolated Frame synchronization input signal for cameras

3

USB D+

USB 2.0 interface used as a host to control external devices. Could be used to connect to the device (eg. reflash), if USB boot is enabled (via GPIO 0).

4

USB D-

USB 2.0 interface used as a host to control external devices. Could be used to connect to the device (eg. reflash), if USB boot is enabled (via GPIO 0).

5

VBUSIN

This pin is used for sourcing 5V power to accessory devices connected to the M8 connector. If trying to boot the device in USB boot mode, this pin can also sink current.

6

Strobe ISO

Isolated Strobe output signal for cameras

7

Isolated GND

Isolated ground for Strobe/FSYNC

8

GND

Ground.

Cameras also include an M8 connector cap for waterproofing in case the M8 connector wouldn’t be used.

../_images/m8-isolated-circiut.png

Dimensions and Weight :

Weight: 184g

../_images/dimensions2.png

Depth perception :

This OAK camera has a baseline of 7.5cm - the distance between left and right stereo camera. Minimal and maximal depth perception depends on camera FOV, resolution, and baseline.

  • Min perceivable distance: ~20cm (400P OR 800P, extended), ~37cm (800P)

  • Max perceivable distance: ~21 meters

Extended means that StereoDepth node has Extended disparity mode enabled.

Write a review
Your Name:


Your Review:
Note: HTML is not translated!
Rating:
Bad           Good

Enter the code in the box below:


Tags: OAK, D, W, PoE, Luxonis, A00575

© 2022, MG Automation Technologies. Powered by MG Super LABS.Find us on Google+
Designed with by