Categories


Phidgets Dual Relay Board

Product Code: Phidgets 3051_1

Phidgets Dual Relay Board
Brand: Phidgets

₹2,089.00
GST inclusive



Qty:

Availability: 1 In Stock


Add to Wish List



Description

This board has 2 SPDT mechanical relays rated at 210W for DC or 1750VA for AC.

The Dual Relay Board allows you to control larger loads and devices like AC or DC motors, electromagnets, solenoids, and incandescent light bulbs.

Note: This board is not suitable for switching signals. It takes at least 100mA of current to bridge the oxide layer that forms on the relay contacts, and most signals will not meet this requirement. If you need to switch signals, check out the 1017 - PhidgetInterfaceKit 0/0/

Product Specifications

Physical Properties
Switch Type SPDT
Switching Speed Max 20 cpm
Recommended Wire Size (Control) 16 - 26 AWG
Recommended Wire Size (Load) 12 - 24 AWG
Operating Temperature Min 0 °C
Operating Temperature Max 70 °C
Board
Controlled By Digital Output (5V)
Current Consumption Min 14 mA
Current Consumption Max 180 mA
Supply Voltage Min 3.3 V DC
Supply Voltage Max 12 V DC
Electrical Properties
Dielectric Strength 1.5 kV AC
Contact Resistance Max 100 mΩ
Load Voltage Max (DC) * 30 V DC
Load Voltage Max (AC) 277 V AC
Load Current Min 100 mA
Load Current Max (DC) 7 A
Load Current Max (AC) 12 A
Turn-on Time Max 10 ms
Turn-off Time Max 10 ms

*Note: Switching this relay at voltages higher than 30V will result in a reduced product lifespan.

Please Note: This relay cannot be switched at its maximum AC voltage and current at the same time. Ensure that total power of the load does not exceed the switching power for the relay. For example, you can switch this relay at 277V AC and 6.3A (1750VA), or at 145V AC and 12A (1750VA), but not at 277V and 12A (3324VA).

Estimated Relay Lifespan

The lifespan of the relays on this Phidget vary depending on how much current you're switching and whether it's AC or DC. The following graph illustrates the relationship between load current and relay lifespan:

FUNCTIONAL

The vertical axis is the lifespan of the relay (number of actuations) and the horizontal axis is load current in amps. As you can see, increasing load current from 5A to 10A can reduce relay life by more than half.

Documents

 

Write a review
Your Name:


Your Review:
Note: HTML is not translated!
Rating:
Bad           Good

Enter the code in the box below:



© 2024, MG Automation Technologies. Powered by MG Super LABS.Find us on Google+
Designed with by