Categories


Micro Load Cell (0-100g) - CZL639HD

Product Code: Phidgets 3139_0

Micro Load Cell (0-100g) - CZL639HD
Micro Load Cell (0-100g) - CZL639HD
Micro Load Cell (0-100g) - CZL639HD
Micro Load Cell (0-100g) - CZL639HD
Brand: Phidgets

₹999.00
GST inclusive



Qty:

Availability: 5 In Stock


Add to Wish List



Description

This small load cell measures shear forces of up to 100g and connects to a bridge input.

A load cell is a force sensing module - a carefully designed metal structure, with small elements called strain gauges mounted in precise locations on the structure. Load cells are designed to measure a specific type of force, and ignore other forces being applied. The electrical signal output by the load cell is very small and requires specialized amplification. Fortunately, Phidget Bridge Interfaces will perform all the amplification and measurement of the electrical output.

Load cells are designed to measure force in one direction. They will often measure force in other directions, but the sensor sensitivity will be different, since parts of the load cell operating under compression are now in tension, and vice versa.

This Single Point Load Cell is often used in small, high-precision scales. It’s mounted by bolting down the end of the load cell where the wires are attached, and applying force on the other end. Where the force is applied is not critical, as this load cell measures a shearing effect on the beam, not the bending of the beam. If you mount a small platform on the load cell, as would be done in a small scale, this load cell provides accurate readings regardless of the position of the load on the platform.

Connection

Load cells require a power source and produce a very small voltage differential when under strain. In order to read this signal, an amplifier or a board with a high-precision analog-to-digital converter is required. 

Product Specifications

Sensor Properties
Sensor Type Shear Load Cell
Controlled By Bridge Input
Weight Capacity Max 100 g
Maximum Overload 120 g
Cell Repeatability Error Max ± 50 mg
Cell Non-Linearity Max 50 mg
Cell Hysteresis Max 50 mg
Electrical Properties
Rated Output 600 μV/V
Rated Output Error Max ± 150 μV/V
Output Impedance 1 kΩ
Creep 100 mg/hr
Temperature Effect on Zero 5 mg/°C
Temperature Effect on Span 5 mg/°C
Supply Voltage Min 3 V DC
Supply Voltage Max 10 V DC
Zero Balance Ratio ± 100 μV/V
Physical Properties
Operating Temperature Min -10 °C
Operating Temperature Max 40 °C
Compensated Temperature Min -10 °C
Compensated Temperature Max 60 °C
Cable Length 110 mm
Cable Gauge 4x 30 AWG
Material Aluminium Alloy (LY12CZ)
Screw Thread Size 2.5M

Documents

 

Write a review
Your Name:


Your Review:
Note: HTML is not translated!
Rating:
Bad           Good

Enter the code in the box below:



© 2024, MG Automation Technologies. Powered by MG Super LABS.Find us on Google+
Designed with by