Categories


Pycom LoPy4 MicroPython enabled development board (LoRa, Sigfox, WiFi, Bluetooth)

Product Code: Seeed 102991025

Pycom LoPy4 MicroPython enabled development board (LoRa, Sigfox, WiFi, Bluetooth)
Pycom LoPy4 MicroPython enabled development board (LoRa, Sigfox, WiFi, Bluetooth)
Pycom LoPy4 MicroPython enabled development board (LoRa, Sigfox, WiFi, Bluetooth)
Pycom LoPy4 MicroPython enabled development board (LoRa, Sigfox, WiFi, Bluetooth)
Brand: Seeedstudio

₹5,269.00
GST inclusive



Qty:

Availability: 1 In Stock


Add to Wish List



The LoPy4 is a compact quadruple network MicroPython enabled development board (LoRa, Sigfox, WiFi, Bluetooth). It’s the perfect enterprise grade IoT platform for your connected Things. With the latest Espressif ESP32 chipset the LoPy4 offers a perfect combination of power, friendliness and flexibility. Create and connect you things everywhere. Fast.

The LoPy4 can act as a LoRa nano gateway and a multi-bearer (LoRa, Sigfox, WiFi and BLE) development platform suitable for all LoRa and Sigfox networks around the globe. It is programmable with MicroPython and the Pymakr plugins for fast IoT application development, easy programming in-field and extra resilience with network failover. You can also configure the LoPy4 in raw LoRa mode to send packets directly between LoPy4’s. The best blend of speed to deployment and access to new LPWAN networks rolling out across Europe, USA, Africa and India. The LoPy4 is CE, FCC approved, LoRaWAN and Sigfox certified.

LoPy4 Features

  • Powerful CPU, BLE and state of the art WiFi radio

  • Can also double up as Nano LoRa gateway

  • MicroPython enabled

  • Fits in a standard breadboard (with headers)

  • Ultra-low power usage: a fraction compared to other connected micro controllers

Processing

  • Espressif ESP32 chipset

  • Dual processor + WiFi radio System on chip

  • Network processor handles the WiFi connectivity and the IPv6 stack

  • Main processor is entirely free to run the user application

  • An extra ULP-coprocessor that can monitor GPIOs, the ADC channels and control most of the internal peripherals during deep-sleep mode while only consuming 25uA

Technical Details

Dimensions 98.50mm x 68.50mm x 22mm
Battery Exclude
CPU Xtensa® dual–core 32–bit LX6 microprocessor(s), up to 600 DMIPS / Hardware floating point acceleration / Python multi–threading / An extra ULP–coprocessor that can monitor GPIOs,the ADC channels and control most of the internal peripherals during deep–sleep mode while only consuming ~25uA.
RAM 520KB + 4MB
External flash 8MB
WiFi 802.11b/g/n 16mbps
Bluetooth Low energy and classic
LoRa LoRaWAN 1.0.2 stack - Class A and C devices / Node range: Up to 40km / Nano-gateway: Up to 22km (Capacity up to 100 nodes)
Sigfox Class 0 device. Maximum Tx power:+14dBm(Europe),+20dBm (America),+20dBm (Australia and New Zealand) / Node range: Up to 50km
RTC Running at 150kHz
Security SSL/TLS support / WPA Enterprise security
Hash / encryption SHA / MD5 / DES / AES
Security & Certifications SSL/TLS support; WPA Enterprise security; FCC 2AJMTLOPY4R; CE 0700
Power
Input 3.3V – 5.5V
Output 3v3 output capable of sourcing up to 400mA
WiFi 12mA in active mode, 5uA in standby
LoRa 15mA in active mode, 1-uA in standby
Sigfox (Europe) 12mA in Rx mode, 42mA in Tx mode and 0.5uA in standby
Sigfox (Australia, New Zealand and South America) 12mA in Rx mode, 120 mA in Tx mode and 0.5uA in standby
Interfaces
  2 x UART, SPI, 2 x I2C, I2S, micro SD card
  Analog channels: 8×12 bit ADCs
  Timers: 4×16 bit with PWM and input capture
  DMA on all peripherals
  GPIO: Up to 24

Part List

LoPy4 1.0 with Headers 1

Documents

Write a review
Your Name:


Your Review:
Note: HTML is not translated!
Rating:
Bad           Good

Enter the code in the box below:



© 2018, MG Automation Technologies. Powered by MG Super LABS.Find us on Google+
Designed with by