Radiation Sensor Board for Arduino, Raspberry Pi and Intel Galileo

The Radiation Sensor Board allows the user to detect Alpha, Beta and Gamma radiation integrating any Geiger Tube which works in the range 400V - 1000V.

This product is compatible with Arduino, Raspberry Pi and Intel Galileo boards.

Detect Alpha, Beta and Gamma radiation integrating any Geiger Tube which works in the range 400V - 1000V and read this levels using Arduino. As well as from the terminal, the radiation levels can be shown using different actuators:

    - Piezo: it allows us to hear the typical "chirp" common in the radioactivity counters
    - Leds: 3 green and 2 red let easily to show low, medium and high levels
    - LCD: it displays the counts per minute (cpm) and the equivalent absorbed energy levels in Servants (µSV/h).

NOTE:
- This version comes without the Geiger tube. A version with a Geiger tube already soldered and "ready to use" is available here:
Radiation Sensor Board for Arduino + Geiger Tube
- In order to test the Geiger Counter you can get Vaseline Glass Bead as a complement in the order options.
- There is a little switch below the LCD you must switch on to use the board.
- The piezo produces a constant very low noise when the board is on, besides the typical "chirp" 

NOTE: If you are searching for Wireless Sensor Networks devices (motes) you may be interested in our ready to market sensor platform: Waspmote which counts with more than 50 sensors available to use.