Categories


Dagu 6DOF Robotic Arm with Base and Controller

Product Code: Dagu RA001

Dagu 6DOF Robotic Arm with Base and Controller
Dagu 6DOF Robotic Arm with Base and Controller
Dagu 6DOF Robotic Arm with Base and Controller

₹20,599.00
GST inclusive



Qty:

Availability: Discontinued


Add to Wish List



This Dagu 6 Degrees of Freedom Robotic Arm is made from 3mm thick aluminum sheet and uses 4 Nos DGServo S06NF STD servos for the base and the arm. The 2 Nos DGServo S05NF STD micro servos operate the wrist and gripper. A serial interface and PC software is included. Since the arm has a few joints, we can imagine our human arm. In addition to shoulder, elbow, and wrist, coupled with the finger joints; there are a lot of joints. So this robot is the same, with six servo motors to achieve a simple structure, no one apart from so many joints, but lack some of nerve tissues and the nervous system, however, "dexterous hand" (which can be complexly assembling, handling or catching eggs), "Humanoid" robot is a robot on the forefront.



The Dagu 6 Degrees of Freedom Robotic Arm with wonderful mechanical structure, and its control system, displays the 6-DOF robot arm movements control principle. At present, the robot arm is mainly 390 mm in length, use 32-way controller to control the operation of arm action, the controllers use atmega168 MCU, and computer RS232 COM communications. At the same time it can control 32 servo motors, dual - power supply (6 ~ 12 V SCM power, 4.8 ~ 6 V servo motor power [servo motor power supply Road 1-16 respectively, a 17-32 road supply port]), also a wi-fi Wireless control module and reserve the ISP downloaded. You can download the MCU controller program using the STK500 ISP cable.



Through careful programming, one can accurately position this robotic arm to perform various complicated movements in continuation. The Robot Arm is suitable for individual development and school competition. It is a good chance for robot fans' improvement.This product is fully assembled and the package includes the control board.

Features:

  • 6 Degrees of freedom robotic arm
  • 6 Servo Motor
  • Includes Robotic Arm Base for fixing to ground
  • Robotic Controller Card Included
  • Length: 390mm
  • Made from 3mm thick aluminium sheet
  • Wonderful mechanical structure, and control system
  • A serial interface and PC software included
Write a review
Your Name:


Your Review:
Note: HTML is not translated!
Rating:
Bad           Good

Enter the code in the box below:



© 2020, MG Automation Technologies. Powered by MG Super LABS.Find us on Google+
Designed with by