Categories


TB67S249FTG Stepper Motor Driver Compact Carrier (Header Pins Soldered)

Product Code: Pololu #3097

TB67S249FTG Stepper Motor Driver Compact Carrier (Header Pins Soldered)
TB67S249FTG Stepper Motor Driver Compact Carrier (Header Pins Soldered)
TB67S249FTG Stepper Motor Driver Compact Carrier (Header Pins Soldered)
TB67S249FTG Stepper Motor Driver Compact Carrier (Header Pins Soldered)
TB67S249FTG Stepper Motor Driver Compact Carrier (Header Pins Soldered)
TB67S249FTG Stepper Motor Driver Compact Carrier (Header Pins Soldered)

₹1,139.00
GST inclusive



Qty:

Availability: 1 In Stock


Add to Wish List



This version of our TB67S249FTG Stepper Motor Driver Compact Carrier ships with male header pins installed, so no soldering is required to use it with an appropriate 16-pin socket or solderless breadboard. The TB67S249FTG has a wide operating voltage range of 10 V to 47 V, and our carrier board can deliver approximately 1.6 A per phase continuously without a heat sink or forced air flow (up to 4.5 A peak). Please see the TB67S249FTG Stepper Motor Driver Compact Carrier product page for more information about the driver.

Dimensions

Size: 0.6″ × 0.8″

General specifications

Motor driver: TB67S249FTG
Minimum operating voltage: 10 V
Maximum operating voltage: 47 V
Continuous current per phase: 1.6 A
Maximum current per phase: 4.5 A
Minimum logic voltage: 2 V
Maximum logic voltage: 5.5 V
Microstep resolutions: full, non-circular 1/2, 1/2, 1/4, 1/8, 1/16, 1/32
Current limit control: potentiometer
Reverse voltage protection?: N
Header pins soldered?: Y

Identifying markings

PCB dev codes: md34a
Other PCB markings: 0J11687

File downloads

TB67S249FTG datasheet (533k pdf)
 
TB67S279FTG datasheet (536k pdf)
Write a review
Your Name:


Your Review:
Note: HTML is not translated!
Rating:
Bad           Good

Enter the code in the box below:



© 2019, MG Automation Technologies. Powered by MG Super LABS.Find us on Google+
Designed with by