Categories


mikromedia Plus for PIC32MX7

Product Code: MIKROE-1399

mikromedia Plus for PIC32MX7
mikromedia Plus for PIC32MX7
mikromedia Plus for PIC32MX7
mikromedia Plus for PIC32MX7

₹20,899.00
GST inclusive



Qty:

Availability: Backorder


Add to Wish List



mikromedia Plus for PIC32MX7

Start building your applications with intuitive, user-friendly menus and dashboards using a powerful MIPS32-core PIC32MX7 microcontroller. This board provides a compact high-quality multimedia development platform for PIC32MX795F512L device.

pic32mx7_main.jpg

Fast and furious

Mighty PIC32MX795F512L microcontroller with 512KB of Flash, 128KB of RAM and loads of on-chip modules is ready to handle your ideas.

Large 4.3" Touch Screen

It’s time to see the big picture. New 4.3” touch screen driven by SSD1963 graphics controller delivers crystal sharp image in 480x272px resolution.

2.4GHz RF transceiver

Nordic’s nRF240L01+ transceiver with active chip antenna will make you forget about wires. Drive it with simple SPI commands. It that easy.

A whole lot of modules

Board has it all: USB connector, temperature sensor, PIN photosensor, IR receiver, accelerometer, battery charger, MP3 codec, buzzer, etc.

Programming

The onboard microcontroller is preprogrammed with fast USB HID bootloader, so it’s ready to work right out of the box. You don’t have to spend a dollar more on programmers. If you need a powerful debugger use mikroProg for PIC, dsPIC and PIC32.

Compilers

mikromedia Plus for PIC32MX7 is fully supported by mikroCmikroBasic and mikroPascal compilers for PIC32. Compilers come with dozens of examples that demonstrate every feature of the board.

GUI design with Visual TFT

Easily create fantastic colorful graphical user interfaces (GUI) for mikromedia in Visual TFT software. Even total beginners will be able to create amazing applications.

Package Contains

  • Damage resistant protective box
  • mikromedia PLUS for PIC32MX7 board in an antistatic bag
  • USB cable, microSD 2GB and 3 headers (2x5 and a pair of 1x26)
  • Documentation

Special discount on the Shield

Use this amazing opportunity and get the Shield for the mikromedia Plus for PIC32MX7 50% OFF. Expand the functionality of your mikromedia with four mikroBUS™ sockets.

We have more than 300 click boards™ in the shop, from wireless transceivers and sensors to motor control click boards™ and displays.

Note: you need to add both the mikromedia Plus and the Shield to the cart in order for the discount to apply.

Specification

Applications Best used as a development board but also as a final product. Use cases include industrial, medical, automotive and other dashboards and equipment.
Displays TFT full-color
Display size 4.3"
Resolution 480x272px
Graphic controller SSD1963
Touch Screen Resistive
Architecture PIC32 (32-bit)
MCU PIC32MX795F512L
MCU speed 105DMIPS, 80 MHz, 1.31 DMIPS/MHz
MCU Memory 512KB of Flash, 128KB RAM
Programming Preprogrammed with fast USB HID bootloader. Also features mikroProg for PIC32 connector
Key Benefits On-board microcontroller is preprogrammed with fast USB HID bootloader
Wireless connectivity Nordic’s nRF240L01+ transceive, IR receiver
Storage 8 Mbit of Serial Flash, microSD card slot
Sound and Audio VS1053 MPEG audio decoder, Piezo Buzzer
Peripherals include USB OTG connector, Temp. sensor, RTC battery, PIN photosensor, Accelerometer, Battery Charger
Expandability Two 1x26 headers, mikromedia standard pinout
Integration Mounting holes
Input Voltage 5V (Via USB) or 5-12V DC (via external adapter)

Downloads

 mikromedia Plus for PIC32MX7 User Manual

 mikromedia Plus for PIC32MX7 Schematic

 mikromedia Plus for PIC32MX7 Examples

 mikromedia Plus for PIC32 USB Bootloader

 mikromedia Plus for PIC32MX7 AutoCad File

Write a review
Your Name:


Your Review:
Note: HTML is not translated!
Rating:
Bad           Good

Enter the code in the box below:



© 2024, MG Automation Technologies. Powered by MG Super LABS.Find us on Google+
Designed with by