The Nano Every is Arduino’s 5V compatible board in the smallest available form factor: 45x18mm!
The Arduino Nano is the preferred board for many projects requiring a small and easy to use microcontroller board. The small footprint and low price, make the Nano Every particularly suited for wearable inventions, low-cost robotics, electronic musical instruments, and general use to control smaller parts of larger projects.
The Arduino Nano Every is an evolution of the traditional Arduino Nano board but features a lot more powerful processor, the ATMega4809. This will allow you to make larger programs than with the Arduino Uno (it has 50% more program memory), and with a lot more variables (the RAM is 200% bigger).
An Improved Arduino Nano
If you used Arduino Nano in your projects in the past, the Nano Every is a pin-equivalent substitute. The main differences are a better processor and a micro-USB connector.
The board comes in two options: with or without headers, allowing you to embed the Nano Every inside any kind of inventions, including wearables. The board comes with tessellated connectors and no components on the B-side. These features allow you to solder the board directly onto your own design, minimizing the height of your whole prototype.
The Arduino Nano Every is based on the ATMega4809 microcontroller.
|DC Current per I/O Pin||20 mA|
|DC Current for 3.3V Pin||50 mA|
|CPU Flash Memory||48KB (ATMega4809)|
|PWM Pins||5 (D3, D5, D6, D9, D10)|
|Analog Input Pins||8 (ADC 10 bit)|
|Analog Output Pins||Only through PWM (no DAC)|
|External Interrupts||all digital pins|
|USB||Uses the ATSAMD11D14A (datasheet)|
|Weight||5 gr (with headers)|
The Arduino Nano Every is open-source hardware! You can build your own board using the following files:
Download the full pinout diagram as PDF here.
Download the Fritzing file here.