Categories


Arty S7-25T: Spartan-7 FPGA Board for Hobbyists and Makers

Product Code: DG 410-352-25

Arty S7-25T: Spartan-7 FPGA Board for Hobbyists and Makers
Arty S7-25T: Spartan-7 FPGA Board for Hobbyists and Makers
Arty S7-25T: Spartan-7 FPGA Board for Hobbyists and Makers
Arty S7-25T: Spartan-7 FPGA Board for Hobbyists and Makers
Brand: Digilent

₹17,209.00
GST inclusive



Qty:

Availability: 1 In Stock


Add to Wish List



The Arty S7 board features new Xilinx Spartan-7 FPGA and is the latest member of the Arty family for Makers and Hobbyists.

The Spartan-7 FPGA offers the most size, performance, and cost-conscious design engineered with the latest technologies from Xilinx. Putting this FPGA in the Arty form factor provides users with a wide variety of I/O and expansion options. Use the dual row Arduino®connectors to mount one of the hundreds of hardware compatible shields available, or use the Pmod ports with Digilent's pre-made Pmod IP blocks for a more streamlined design experience. Arty S7 was designed to be MicroBlaze ready and comes out of the box ready to use with Xilinx's WebPACK licensing. 

 arty-s7-block-diagram.png

Arty S7 block diagram.

Support Materials

Datasheet

Schematics (Rev. E PDF)

For all other material:

Resource Center

Features:

  • Arty S7 comes in two FPGA variants: Arty S7-25T features Xilinx XC7S25-CSGA324. Arty S7-50T features the larger Xilinx XC7S50-CSGA324. Arty S7 has the features listed below:

  Arty S7-25T Arty S7-50T
FPGA part XC7S25-CSGA324 XC7S50-CSGA324
1 MSPS On-chip ADC Yes Yes
Logic Cells 23,360 52,160
Slices 3,650 8,150
Flip-flops 29,200 65,200
Block RAM (Kbits) 1,620 2,700
Clock Management Tiles 3 5
DSP Slices 80 120
  • Internal clock speeds exceeding 450MHz;

  • On-chip analog-to-digital converter (XADC).

  • Programmable over JTAG and Quad-SPI Flash

  • System Features:

    • 256 MB DDR3L with a 16-bit bus @ 650 MHz

    • 128 Mbits Quad-SPI Flash

    • 100 MHz External Clock 
    • USB-JTAG Programming circuitry (USB Micro cable requiredNOT INCLUDED). 

    • Powered from USB or any 7V-15V source

  • System Connectivity:

    • USB-UART Bridge

  • Interaction and Sensory Devices

    • 4 Switches

    • 4 Buttons

    • 1 Board Reset Button

    • 1 FPGA Reset Button
    • 4 Green LEDs

    • 2 RGB LEDs

  • Expansion Connectors:

    • 4 Pmod connectors

    • Arduino/chipKIT Shield connector

What Included: 

  • Arty S7 Board Spartan-7 FPGA (Micro USB cable not included)
  • Digilent cardboard packaging with protective foam

Product Video:

Write a review
Your Name:


Your Review:
Note: HTML is not translated!
Rating:
Bad           Good

Enter the code in the box below:



© 2024, MG Automation Technologies. Powered by MG Super LABS.Find us on Google+
Designed with by