Categories


DAC2 Click

Product Code: MIKROE-1918

DAC2 Click
DAC2 Click
DAC2 Click
DAC2 Click

₹1,999.00
GST inclusive



Qty:

Availability: Backorder


Add to Wish List



DAC2 click carries LTC2601CDD, a 16-bit digital-to-analog converter, along with voltage output screw terminals. The chip has high rail-to-rail output drives (±15mA, Min) and double-buffered data latches. The click board communicates with the target MCU through the mikroBUS SPI interface with clock rates up to 50MHz. Additionally, the CLR pin, in place of default mikroBUS RST pin, clears all the registers. The board uses either a 3.3V or 5V power supply. You can also set the reference voltage either to VCC or 4.096V.

Specification

Type DAC
Applications Device provides very high accuracy and low noise performance, and is suitable for consumer and industrial applications, such as mobile communications. Process Control and Industrial Automation n Instrumentation, Automatic Test Equipment
On-board modules LTC2601CDD 16-bit digital-to-analog converter
Key Features High rail-to-rail output drives (±15mA, Min). Double buffered data latches
Key Benefits SPI clock rate up to 50MHz. Selectable reference voltage
Interface GPIO,SPI
Input Voltage 3.3V or 5V
Compatibility mikroBUS
Click board size S (28.6 x 25.4 mm)

Downloads

 DAC2 Click user manual

 DAC2 Click examples 

Write a review
Your Name:


Your Review:
Note: HTML is not translated!
Rating:
Bad           Good

Enter the code in the box below:


Tags: DAC2, Click, MIKROE, 1918,

© 2024, MG Automation Technologies. Powered by MG Super LABS.Find us on Google+
Designed with by